# Traditional Chinese translation for pg_ctl.
# 2004-07-30 Zhenbang Wei <forth@zbwei.net>
#
msgid ""
msgstr ""
"Project-Id-Version: PostgreSQL 8.0\n"
"POT-Creation-Date: 2004-09-17 01:09+0100\n"
"PO-Revision-Date: 2004-09-17 13:54+0800\n"
"Last-Translator: Zhenbang Wei <forth@zbwei.net>\n"
"Language-Team: Zhenbang Wei <forth@zbwei.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: pg_ctl.c:193
#: pg_ctl.c:209
#: pg_ctl.c:1293
#, c-format
msgid "%s: out of memory\n"
msgstr "%s: 記憶體用盡\n"

#: pg_ctl.c:452
#, c-format
msgid "%s: Another postmaster may be running. Trying to start postmaster anyway.\n"
msgstr "%s: 可能有另一個postmaster正在執行，嘗試強制啟動postmaster。\n"

#: pg_ctl.c:470
#, c-format
msgid "%s: cannot read %s\n"
msgstr "%s: 無法讀取 %s\n"

#: pg_ctl.c:476
#, c-format
msgid "%s: option file %s must have exactly 1 line\n"
msgstr "%s: 選項檔 %s 只能有一行資料\n"

#: pg_ctl.c:522
#, c-format
msgid ""
"The program \"postmaster\" is needed by %s but was not found in the same directory as \"%s\".\n"
"Check your installation.\n"
msgstr ""
"%s 需要\"postmaster\"程式，但是在與\"%s\"相同的目錄中找不到。\n"
"檢查你的安裝。\n"

#: pg_ctl.c:528
#, c-format
msgid ""
"The program \"postmaster\" was found by %s but was not the same version as \"%s\".\n"
"Check your installation.\n"
msgstr ""
"%s 已找到程式\"postmaster\"，但是與 \"%s\"版本不符。\n"
"請檢查你的安裝。\n"

#: pg_ctl.c:539
msgid "Unable to run the postmaster binary\n"
msgstr "無法執行postmaster執行檔\n"

#: pg_ctl.c:549
#, c-format
msgid ""
"%s: cannot start postmaster\n"
"Examine the log output\n"
msgstr ""
"%s: 無法啟動postmaster\n"
"請檢查log輸出\n"

#: pg_ctl.c:560
msgid "waiting for postmaster to start..."
msgstr "等待postmaster啟動..."

#: pg_ctl.c:565
msgid "could not start postmaster\n"
msgstr "無法啟動postmaster\n"

#: pg_ctl.c:567
msgid ""
"done\n"
"postmaster started\n"
msgstr ""
"完成\n"
"postmaster已經啟動\n"

#: pg_ctl.c:570
msgid "postmaster starting\n"
msgstr "postmaster正在啟動\n"

#: pg_ctl.c:585
#: pg_ctl.c:664
#: pg_ctl.c:734
#, c-format
msgid "%s: could not find %s\n"
msgstr "%s: 找不到 %s\n"

#: pg_ctl.c:586
#: pg_ctl.c:735
msgid "Is postmaster running?\n"
msgstr "postmaster是否正在執行？\n"

#: pg_ctl.c:592
#, c-format
msgid "%s: cannot stop postmaster; postgres is running (PID: %ld)\n"
msgstr "%s: 無法停止postmaster，postgres正在執行(PID: %ld)\n"

#: pg_ctl.c:600
#: pg_ctl.c:681
#, c-format
msgid "stop signal failed (PID: %ld): %s\n"
msgstr "stop信號失敗(PID: %ld): %s\n"

#: pg_ctl.c:608
msgid "postmaster shutting down\n"
msgstr "postmaster正在關閉\n"

#: pg_ctl.c:615
#: pg_ctl.c:688
msgid "waiting for postmaster to shut down..."
msgstr "等待postmaster關閉..."

#: pg_ctl.c:637
#: pg_ctl.c:712
msgid " failed\n"
msgstr "失敗\n"

#: pg_ctl.c:639
#: pg_ctl.c:714
#, c-format
msgid "%s: postmaster does not shut down\n"
msgstr "%s: postmaster無法關閉\n"

#: pg_ctl.c:643
#: pg_ctl.c:719
msgid "done\n"
msgstr "完成\n"

#: pg_ctl.c:645
#: pg_ctl.c:721
msgid "postmaster stopped\n"
msgstr "postmaster停止執行\n"

#: pg_ctl.c:665
msgid ""
"Is postmaster running?\n"
"starting postmaster anyway\n"
msgstr ""
"postmaster是否正在執行？\n"
"強制啟動postmaster\n"

#: pg_ctl.c:672
#, c-format
msgid "%s: cannot restart postmaster; postgres is running (PID: %ld)\n"
msgstr "%s: 無法重新啟動postmaster，postgres正在執行(PID: %ld)\n"

#: pg_ctl.c:675
#: pg_ctl.c:744
msgid "Please terminate postgres and try again.\n"
msgstr "請結束postgres然後再試一次。\n"

#: pg_ctl.c:741
#, c-format
msgid "%s: cannot reload postmaster; postgres is running (PID: %ld)\n"
msgstr "%s: 無法重新載入postmaster， postgres正在執行(PID: %ld)\n"

#: pg_ctl.c:750
#, c-format
msgid "reload signal failed (PID: %ld): %s\n"
msgstr "reload信號失敗(PID: %ld): %s\n"

#: pg_ctl.c:756
msgid "postmaster signaled\n"
msgstr "已通知postmaster\n"

#: pg_ctl.c:771
#, c-format
msgid "%s: postmaster or postgres not running\n"
msgstr "%s: postmaster或postgres尚未執行\n"

#: pg_ctl.c:777
#, c-format
msgid "%s: a standalone backend \"postgres\" is running (PID: %ld)\n"
msgstr "%s: 一個獨立後端\"postgres\"正在執行(PID: %ld)\n"

#: pg_ctl.c:784
#, c-format
msgid "%s: postmaster is running (PID: %ld)\n"
msgstr "%s: postmaster正在執行(PID: %ld)\n"

#: pg_ctl.c:800
#, c-format
msgid "signal %d failed (PID: %ld): %s\n"
msgstr "信號 %d 失敗(PID: %ld): %s\n"

#: pg_ctl.c:831
msgid "Unable to find exe"
msgstr "找不到執行檔"

#: pg_ctl.c:878
#: pg_ctl.c:910
msgid "Unable to open service manager\n"
msgstr "無法開啟服務管理員\n"

#: pg_ctl.c:884
#, c-format
msgid "Service \"%s\" already registered\n"
msgstr "服務\"%s\"已經被註冊\n"

#: pg_ctl.c:895
#, c-format
msgid "Unable to register service \"%s\" [%d]\n"
msgstr "無法註冊服務\"%s\" [%d]\n"

#: pg_ctl.c:916
#, c-format
msgid "Service \"%s\" not registered\n"
msgstr "服務\"%s\"未被註冊\n"

#: pg_ctl.c:923
#, c-format
msgid "Unable to open service \"%s\" [%d]\n"
msgstr "無法開啟服務\"%s\" [%d]\n"

#: pg_ctl.c:930
#, c-format
msgid "Unable to unregister service \"%s\" [%d]\n"
msgstr "無法移除服務\"%s\" [%d]\n"

#: pg_ctl.c:1067
#, c-format
msgid ""
"\n"
"Try \"%s --help\" for more information.\n"
msgstr ""
"\n"
"執行\"%s --help\"以顯示更多資訊。\n"

#: pg_ctl.c:1075
#, c-format
msgid ""
"%s is a utility to start, stop, restart, reload configuration files,\n"
"report the status of a PostgreSQL server, or kill a PostgreSQL process\n"
"\n"
msgstr ""
"%s 可以用來啟動、停止、重新啟動、重新載入設定檔、\n"
"報告PostgreSQL伺服器狀態，或是殺掉PostgreSQL行程\n"
"\n"

#: pg_ctl.c:1077
msgid "Usage:\n"
msgstr "使用方法:\n"

#: pg_ctl.c:1078
#, c-format
msgid "  %s start   [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]\n"
msgstr "  %s start   [-w] [-D 資料目錄] [-s] [-l 檔名] [-o \"選項\"]\n"

#: pg_ctl.c:1079
#, c-format
msgid "  %s stop    [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]\n"
msgstr "  %s stop    [-W] [-D 資料目錄] [-s] [-m 關閉模式]\n"

#: pg_ctl.c:1080
#, c-format
msgid "  %s restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o \"OPTIONS\"]\n"
msgstr "  %s restart [-w] [-D 資料目錄] [-s] [-m 關閉模式] [-o \"選項\"]\n"

#: pg_ctl.c:1081
#, c-format
msgid "  %s reload  [-D DATADIR] [-s]\n"
msgstr "  %s reload  [-D 資料目錄] [-s]\n"

#: pg_ctl.c:1082
#, c-format
msgid "  %s status  [-D DATADIR]\n"
msgstr "  %s status  [-D 資料目錄]\n"

#: pg_ctl.c:1083
#, c-format
msgid "  %s kill    SIGNALNAME PROCESSID\n"
msgstr "  %s kill    信號名稱 行程ID\n"

#: pg_ctl.c:1085
#, c-format
msgid "  %s register   [-N servicename] [-U username] [-P password] [-D DATADIR] [-w] [-o \"OPTIONS\"]\n"
msgstr "  %s register   [-N 服務名稱] [-U 使用者] [-P 密碼] [-D 資料目錄] [-w] [-o \"選項\"]\n"

#: pg_ctl.c:1086
#, c-format
msgid "  %s unregister [-N servicename]\n"
msgstr "  %s unregister [-N 服務名稱]\n"

#: pg_ctl.c:1088
msgid "Common options:\n"
msgstr "一般選項:\n"

#: pg_ctl.c:1089
msgid "  -D, --pgdata DATADIR   location of the database storage area\n"
msgstr "  -D, --pgdata 資料目錄  存放資料庫的目錄\n"

#: pg_ctl.c:1090
msgid "  -s, --silent only print errors, no informational messages\n"
msgstr "  -s, --silent 只顯示錯誤，不顯示其它訊息\n"

#: pg_ctl.c:1092
msgid "  -N       service name with which to register PostgreSQL server\n"
msgstr "  -N       用來註冊PostgreSQL伺服器的服務名稱\n"

#: pg_ctl.c:1093
msgid "  -P       password of account to register PostgreSQL server\n"
msgstr "  -P       用來註冊PostgreSQL伺服器的密碼\n"

#: pg_ctl.c:1094
msgid "  -U       user name of account to register PostgreSQL server\n"
msgstr "  -U       用來註冊PostgreSQL伺服器的帳號\n"

#: pg_ctl.c:1096
msgid "  -w           wait until operation completes\n"
msgstr "  -w           等待操作完成\n"

#: pg_ctl.c:1097
msgid "  -W           do not wait until operation completes\n"
msgstr "  -W           不等待操作完成\n"

#: pg_ctl.c:1098
msgid "  --help       show this help, then exit\n"
msgstr "  --help       顯示這份說明然後結束\n"

#: pg_ctl.c:1099
msgid "  --version    output version information, then exit\n"
msgstr "  --version    顯示版本資訊然後結束\n"

#: pg_ctl.c:1100
msgid ""
"(The default is to wait for shutdown, but not for start or restart.)\n"
"\n"
msgstr ""
"(預設是關閉時而非啟動或重新啟動時等待。)\n"
"\n"

#: pg_ctl.c:1101
msgid ""
"If the -D option is omitted, the environment variable PGDATA is used.\n"
"\n"
msgstr ""
"選項 -D 已經取消，改用環境變數PGDATA。\n"
"\n"

#: pg_ctl.c:1102
msgid "Options for start or restart:\n"
msgstr "啟動或重新啟動可用選項:\n"

#: pg_ctl.c:1103
msgid ""
"  -l, --log FILENAME      write (or append) server log to FILENAME.  The\n"
"                          use of this option is highly recommended.\n"
msgstr "  -l, --log 檔名          將伺服器log寫入檔案，建議使用。\n"

#: pg_ctl.c:1105
msgid ""
"  -o OPTIONS              command line options to pass to the postmaster\n"
"                          (PostgreSQL server executable)\n"
msgstr "  -o 選項                 傳給postmaster(PostgreSQL伺服器執行檔)的命令列選項\n"

#: pg_ctl.c:1107
msgid ""
"  -p PATH-TO-POSTMASTER   normally not necessary\n"
"\n"
msgstr ""
"  -p postmaster的路徑     通常不需要\n"
"\n"

#: pg_ctl.c:1108
msgid "Options for stop or restart:\n"
msgstr "停止或重新啟動可用選項:\n"

#: pg_ctl.c:1109
msgid ""
"  -m SHUTDOWN-MODE   may be 'smart', 'fast', or 'immediate'\n"
"\n"
msgstr ""
"  -m 關閉模式        可以是'smart'、'fast'或'immediate'\n"
"\n"

#: pg_ctl.c:1110
msgid "Allowed signal names for kill:\n"
msgstr "kill可以使用的信號名稱:\n"

#: pg_ctl.c:1111
msgid ""
"  HUP INT QUIT ABRT TERM USR1 USR2\n"
"\n"
msgstr ""

#: pg_ctl.c:1112
msgid "Shutdown modes are:\n"
msgstr "關閉模式:\n"

#: pg_ctl.c:1113
msgid "  smart       quit after all clients have disconnected\n"
msgstr "  smart       在所有用戶端斷線後關閉\n"

#: pg_ctl.c:1114
msgid "  fast        quit directly, with proper shutdown\n"
msgstr "  fast        直接正常關閉\n"

#: pg_ctl.c:1115
msgid ""
"  immediate   quit without complete shutdown; will lead to recovery on restart\n"
"\n"
msgstr ""
"  immediate   立即關閉，會導致下次啟動時需要復原程序\n"
"\n"

#: pg_ctl.c:1116
msgid "Report bugs to <pgsql-bugs@postgresql.org>.\n"
msgstr "回報錯誤至 <pgsql-bugs@postgresql.org>。\n"

#: pg_ctl.c:1141
#, c-format
msgid "%s: invalid shutdown mode %s\n"
msgstr "%s: 無效的關閉模式 %s\n"

#: pg_ctl.c:1174
#, c-format
msgid "%s: invalid signal \"%s\"\n"
msgstr "%s: 無效的信號\"%s\"\n"

#: pg_ctl.c:1309
#, c-format
msgid "%s: invalid option %s\n"
msgstr "%s: 無效的選項 %s\n"

#: pg_ctl.c:1320
#, c-format
msgid "%s: extra operation mode %s\n"
msgstr "%s: 多餘的操作模式 %s\n"

#: pg_ctl.c:1339
#, c-format
msgid "%s: invalid kill syntax\n"
msgstr "%s: 無效的kill語法\n"

#: pg_ctl.c:1357
#, c-format
msgid "%s: invalid operation mode %s\n"
msgstr "%s: 無效的操作模式 %s\n"

#: pg_ctl.c:1367
#, c-format
msgid "%s: no operation specified\n"
msgstr "%s: 未指定操作方式\n"

#: pg_ctl.c:1383
#, c-format
msgid "%s: no database directory specified and environment variable PGDATA unset\n"
msgstr "%s: 未指定資料目錄和設定環境變數PGDATA\n"