diff --git a/src/test/ssl/t/001_ssltests.pl b/src/test/ssl/t/001_ssltests.pl
index 9fac0689ee..b5fb15f794 100644
--- a/src/test/ssl/t/001_ssltests.pl
+++ b/src/test/ssl/t/001_ssltests.pl
@@ -10,6 +10,7 @@ use FindBin;
 use lib $FindBin::RealBin;
 
 use SSLServer;
+use LogCollector;
 
 if ($ENV{with_ssl} ne 'openssl')
 {
@@ -454,8 +455,7 @@ test_connect_fails(
 );
 
 
-my $log = $node->rotate_logfile();
-$node->restart;
+my $log = LogCollector->new($node);
 
 # correct client cert using whole DN
 my $dn_connstr = "$common_connstr dbname=certdb_dn";
@@ -466,16 +466,10 @@ test_connect_ok(
 	"certificate authorization succeeds with DN mapping"
 );
 
-$node->stop('fast');
-my $log_contents = slurp_file($log);
-
-like(
-	$log_contents,
+$log->like(
 	qr/connection authenticated: identity="CN=ssltestuser-dn,OU=Testing,OU=Engineering,O=PGDG" method=cert/,
 	"authenticated DNs are logged");
 
-$node->start;
-
 # same thing but with a regex
 $dn_connstr = "$common_connstr dbname=certdb_dn_re";
 
@@ -485,8 +479,7 @@ test_connect_ok(
 	"certificate authorization succeeds with DN regex mapping"
 );
 
-$log = $node->rotate_logfile();
-$node->restart;
+$log->rotate;
 
 # same thing but using explicit CN
 $dn_connstr = "$common_connstr dbname=certdb_cn";
@@ -497,17 +490,10 @@ test_connect_ok(
 	"certificate authorization succeeds with CN mapping"
 );
 
-$node->stop('fast');
-$log_contents = slurp_file($log);
-
-like(
-	$log_contents,
+$log->like(
 	qr/connection authenticated: identity="CN=ssltestuser-dn,OU=Testing,OU=Engineering,O=PGDG" method=cert/,
 	"full authenticated DNs are logged even in CN mapping mode");
 
-$node->start;
-
-
 
 TODO:
 {
@@ -565,8 +551,7 @@ SKIP:
 		"certificate authorization fails because of file permissions");
 }
 
-$log = $node->rotate_logfile();
-$node->restart;
+$log->rotate;
 
 # client cert belonging to another user
 test_connect_fails(
@@ -576,17 +561,10 @@ test_connect_fails(
 	"certificate authorization fails with client cert belonging to another user"
 );
 
-$node->stop('fast');
-$log_contents = slurp_file($log);
-
-like(
-	$log_contents,
+$log->like(
 	qr/connection authenticated: identity="CN=ssltestuser" method=cert/,
 	"cert authentication succeeds even if authorization fails");
 
-$log = $node->rotate_logfile();
-$node->restart;
-
 # revoked client cert
 test_connect_fails(
 	$common_connstr,
@@ -594,25 +572,16 @@ test_connect_fails(
 	qr/SSL error/,
 	"certificate authorization fails with revoked client cert");
 
-$node->stop('fast');
-$log_contents = slurp_file($log);
-
-unlike(
-	$log_contents,
+$log->unlike(
 	qr/connection authenticated:/,
 	"revoked certs do not authenticate users");
 
-$node->start;
-
 # Check that connecting with auth-option verify-full in pg_hba:
 # works, iff username matches Common Name
 # fails, iff username doesn't match Common Name.
 $common_connstr =
   "sslrootcert=ssl/root+server_ca.crt sslmode=require dbname=verifydb hostaddr=$SERVERHOSTADDR";
 
-$log = $node->rotate_logfile();
-$node->restart;
-
 test_connect_ok(
 	$common_connstr,
 	"user=ssltestuser sslcert=ssl/client.crt sslkey=ssl/client_tmp.key",
@@ -634,18 +603,12 @@ test_connect_ok(
 	"auth_option clientcert=verify-ca succeeds with mismatching username and Common Name"
 );
 
-$node->stop('fast');
-$log_contents = slurp_file($log);
-
 # None of the above connections to verifydb should have resulted in
 # authentication.
-unlike(
-	$log_contents,
+$log->unlike(
 	qr/connection authenticated:/,
 	"trust auth method does not set authenticated identity");
 
-$node->start;
-
 # intermediate client_ca.crt is provided by client, and isn't in server's ssl_ca_file
 switch_server_cert($node, 'server-cn-only', 'root_ca');
 $common_connstr =
diff --git a/src/test/ssl/t/002_scram.pl b/src/test/ssl/t/002_scram.pl
index c15b9c405b..81aaa0b02d 100644
--- a/src/test/ssl/t/002_scram.pl
+++ b/src/test/ssl/t/002_scram.pl
@@ -12,6 +12,7 @@ use FindBin;
 use lib $FindBin::RealBin;
 
 use SSLServer;
+use LogCollector;
 
 if ($ENV{with_ssl} ne 'openssl')
 {
@@ -102,8 +103,7 @@ test_connect_fails(
 	qr/channel binding required, but server authenticated client without channel binding/,
 	"Cert authentication and channel_binding=require");
 
-my $log = $node->rotate_logfile();
-$node->restart;
+my $log = LogCollector->new($node);
 
 # Certificate verification at the connection level should still work fine.
 test_connect_ok(
@@ -111,16 +111,10 @@ test_connect_ok(
 	"dbname=verifydb user=ssltestuser channel_binding=require",
 	"SCRAM with clientcert=verify-full and channel_binding=require");
 
-$node->stop('fast');
-my $log_contents = slurp_file($log);
-
-like(
-	$log_contents,
+$log->like(
 	qr/connection authenticated: identity="ssltestuser" method=scram-sha-256/,
 	"SCRAM with clientcert=verify-full sets the username as the authenticated identity");
 
-$node->start;
-
 # clean up
 unlink($client_tmp_key);
 
diff --git a/src/test/ssl/t/LogCollector.pm b/src/test/ssl/t/LogCollector.pm
new file mode 100644
index 0000000000..ce0c4063f2
--- /dev/null
+++ b/src/test/ssl/t/LogCollector.pm
@@ -0,0 +1,84 @@
+# This module defines a class to help match log entries to specific connections
+# or queries.
+
+package LogCollector;
+
+use strict;
+use warnings;
+use TestLib;
+use Test::More ();
+
+use Exporter 'import';
+our @EXPORT = qw(
+  start_log_capture
+);
+
+# Wrap a new collector around $node.
+#
+# The node's current logfile will be saved, then rotated, so that future log
+# entries are written to a new logfile. Whenever the rotate() method is called
+# on the collector, all entries from the new logfile will be appended to the old
+# logfile, and then the new logfile will be truncated. This gives a clean slate
+# to the next tests.
+sub new
+{
+	my ($class, $node) = @_;
+
+	my $self = {
+		_node     => $node,
+		_orig_log => $node->logfile,
+		_log      => $node->rotate_logfile,
+	};
+	bless $self, $class;
+
+	$node->restart; # start writing to the new log
+	return $self;
+}
+
+# Returns the contents of the current (new) logfile. These will be written to
+# the old logfile when rotate() is called.
+sub contents
+{
+	my $self = shift;
+
+	return slurp_file($self->{_log});
+}
+
+# Writes the current contents of the new logfile to the old logfile, then
+# truncates the new logfile.
+sub rotate
+{
+	my $self = shift;
+	my $log_contents = $self->contents;
+
+	append_to_file($self->{_orig_log}, $log_contents);
+	truncate $self->{_log}, 0;
+}
+
+# Calls Test::More::like on the current logfile contents, then rotates the logs
+# so that future calls to like() or unlike() will not match the contents that
+# have already been checked.
+#
+# To avoid the auto-rotation behavior (e.g. if you want to perform multiple
+# checks on the same log contents), use contents() instead and perform a manual
+# rotate() after the checks are complete.
+sub like
+{
+	my ($self, $expected, $name) = @_;
+
+	Test::More::like($self->contents, $expected, $name);
+
+	$self->rotate;
+}
+
+# The opposite of like(), above.
+sub unlike
+{
+	my ($self, $expected, $name) = @_;
+
+	Test::More::unlike($self->contents, $expected, $name);
+
+	$self->rotate;
+}
+
+1;
