diff --git a/src/include/lib/radixtree.h b/src/include/lib/radixtree.h
index bde6916184..ffb0b58826 100644
--- a/src/include/lib/radixtree.h
+++ b/src/include/lib/radixtree.h
@@ -287,19 +287,6 @@ RT_SCOPE void RT_STATS(RT_RADIX_TREE * tree);
 /* Tree level the radix tree uses */
 #define RT_MAX_LEVEL	((sizeof(uint64) * BITS_PER_BYTE) / RT_SPAN)
 
-/*
- * Number of bits necessary for isset array in node48.
- * Since bitmapword can be 64 bits, the only values that make sense
- * here are 64 and 128.
- * WIP: The paper uses at most 64 for this node kind. "isset" happens to fit
- * inside a single bitmapword on most platforms, so it's a good starting
- * point. We can make it higher if we need to.
- */
-#define RT_SLOT_IDX_LIMIT (RT_NODE_MAX_SLOTS / 4)
-
-/* Invalid index used in node48 */
-#define RT_INVALID_SLOT_IDX	0xFF
-
 /* Get a chunk from the key */
 #define RT_GET_KEY_CHUNK(key, shift) ((uint8) (((key) >> (shift)) & RT_CHUNK_MASK))
 
@@ -426,20 +413,29 @@ typedef union RT_NODE_PTR
 }			RT_NODE_PTR;
 
 /*
- * fanout values for each size class.
- *
- * RT_FANOUT_4_HI and RT_FANOUT_16_HI are declared here as they are
+ * Symbols for maximum possible fanout are declared first as they are
  * required to declare each node kind. The declarations of other fanout
  * values are followed as they need the struct sizes of each node kind.
- *
- * TODO: consider 5 with subclass 1 or 2.
  */
 
 /* max possible key chunks without struct padding */
-#define RT_FANOUT_4_HI (8 - sizeof(RT_NODE))
+#define RT_FANOUT_4_MAX (8 - sizeof(RT_NODE))
 
 /* equal to two 128-bit SIMD registers, regardless of availability */
-#define RT_FANOUT_16_HI	32
+#define RT_FANOUT_16_MAX	32
+
+/*
+ * This also determines the number of bits necessary for the isset array,
+ * so we need to be mindful of the size of bitmapword.
+ * Since bitmapword can be 64 bits, the only values that make sense
+ * here are 64 and 128.
+ * WIP: The paper uses at most 64 for this node kind. "isset" happens to fit
+ * inside a single bitmapword on most platforms, so it's a good starting
+ * point. We can make it higher if we need to.
+ */
+#define RT_FANOUT_48_MAX (RT_NODE_MAX_SLOTS / 4)
+
+#define RT_FANOUT_256   RT_NODE_MAX_SLOTS
 
 /*
  * Node structs, one for each "kind"
@@ -448,7 +444,7 @@ typedef struct RT_NODE_4
 {
 	RT_NODE		base;
 
-	uint8		chunks[RT_FANOUT_4_HI];
+	uint8		chunks[RT_FANOUT_4_MAX];
 
 	/* number of children depends on size class */
 	RT_PTR_ALLOC children[FLEXIBLE_ARRAY_MEMBER];
@@ -458,7 +454,7 @@ typedef struct RT_NODE_16
 {
 	RT_NODE		 base;
 
-	uint8		chunks[RT_FANOUT_16_HI];
+	uint8		chunks[RT_FANOUT_16_MAX];
 
 	/* number of children depends on size class */
 	RT_PTR_ALLOC children[FLEXIBLE_ARRAY_MEMBER];
@@ -476,8 +472,11 @@ typedef struct RT_NODE_48
 	/* The index of slots for each fanout */
 	uint8		slot_idxs[RT_NODE_MAX_SLOTS];
 
+/* Invalid index */
+#define RT_INVALID_SLOT_IDX	0xFF
+
 	/* bitmap to track which slots are in use */
-	bitmapword	isset[RT_BM_IDX(RT_SLOT_IDX_LIMIT)];
+	bitmapword	isset[RT_BM_IDX(RT_FANOUT_48_MAX)];
 
 	/* number of children depends on size class */
 	RT_PTR_ALLOC children[FLEXIBLE_ARRAY_MEMBER];
@@ -493,28 +492,29 @@ typedef struct RT_NODE_256
 {
 	RT_NODE		 base;
 
-	/*
-	 * Zero is a valid value for embedded values, so we use a bitmap to track
-	 * which slots are in use.
-	 */
-	bitmapword	isset[RT_BM_IDX(RT_NODE_MAX_SLOTS)];
+	/* bitmap to track which slots are in use */
+	bitmapword	isset[RT_BM_IDX(RT_FANOUT_256)];
 
 	/* Slots for 256 children */
-	RT_PTR_ALLOC children[RT_NODE_MAX_SLOTS];
+	RT_PTR_ALLOC children[RT_FANOUT_256];
 }			RT_NODE_256;
 
-#define RT_FANOUT_4		4
-StaticAssertDecl(RT_FANOUT_4 <= RT_FANOUT_4_HI, "watch struct padding");
-
 #if defined(RT_SHMEM)
-/* make sure the node16 subclass and node48 fit neatly into a DSA size class */
+/*
+ * Make sure the all nodes (except for node256) fit neatly into a DSA size class.
+ * We assume the RT_FANOUT_4 is in the range where DSA size classes
+ * increment by 8 (as of PG17 up to 64 bytes), so we just hard
+ * code that one.
+ */
 
 #if SIZEOF_DSA_POINTER < 8
 #define RT_FANOUT_16_LO	((96 - offsetof(RT_NODE_16, children)) / sizeof(RT_PTR_ALLOC))
-#define RT_FANOUT_48	((512 - offsetof(RT_NODE_48, children)) / sizeof(RT_PTR_ALLOC))
+#define RT_FANOUT_16_HI	Min(RT_FANOUT_16_MAX, (160 - offsetof(RT_NODE_16, children)) / sizeof(RT_PTR_ALLOC))
+#define RT_FANOUT_48	Min(RT_FANOUT_48_MAX, (512 - offsetof(RT_NODE_48, children)) / sizeof(RT_PTR_ALLOC))
 #else
 #define RT_FANOUT_16_LO	((160 - offsetof(RT_NODE_16, children)) / sizeof(RT_PTR_ALLOC))
-#define RT_FANOUT_48	((768 - offsetof(RT_NODE_48, children)) / sizeof(RT_PTR_ALLOC))
+#define RT_FANOUT_16_HI	Min(RT_FANOUT_16_MAX, (320 - offsetof(RT_NODE_16, children)) / sizeof(RT_PTR_ALLOC))
+#define RT_FANOUT_48	Min(RT_FANOUT_48_MAX, (768 - offsetof(RT_NODE_48, children)) / sizeof(RT_PTR_ALLOC))
 #endif							/* SIZEOF_DSA_POINTER < 8 */
 
 #else							/* ! RT_SHMEM */
@@ -522,14 +522,17 @@ StaticAssertDecl(RT_FANOUT_4 <= RT_FANOUT_4_HI, "watch struct padding");
 /* doesn't really matter, but may as well use the namesake */
 #define RT_FANOUT_16_LO	16
 /* use maximum possible */
-#define RT_FANOUT_48	RT_SLOT_IDX_LIMIT
+#define RT_FANOUT_16_HI RT_FANOUT_16_MAX
+#define RT_FANOUT_48	RT_FANOUT_48_MAX
 
 #endif							/* RT_SHMEM */
 
-#define RT_FANOUT_256	256
+/* TODO: consider 5 with subclass 1 or 2. */
+#define RT_FANOUT_4		4
 
+StaticAssertDecl(RT_FANOUT_4 <= RT_FANOUT_4_MAX, "watch struct padding");
 StaticAssertDecl(RT_FANOUT_16_LO < RT_FANOUT_16_HI, "LO subclass bigger than HI");
-StaticAssertDecl(RT_FANOUT_48 <= RT_SLOT_IDX_LIMIT, "more slots than isset bits");
+StaticAssertDecl(RT_FANOUT_48 <= RT_FANOUT_48_MAX, "more slots than isset bits");
 
 /*
  * Node size classes
@@ -1332,7 +1335,7 @@ RT_ADD_CHILD_48(RT_RADIX_TREE * tree, RT_PTR_ALLOC * ref, RT_NODE_PTR node,
 					inverse;
 
 		/* get the first word with at least one bit not set */
-		for (int i = 0; i < RT_BM_IDX(RT_SLOT_IDX_LIMIT); i++)
+		for (int i = 0; i < RT_BM_IDX(RT_FANOUT_48_MAX); i++)
 		{
 			w = n48->isset[i];
 			if (w < ~((bitmapword) 0))
@@ -2771,7 +2774,7 @@ RT_DUMP_NODE(RT_NODE * node)
 				}
 
 				fprintf(stderr, "isset-bitmap: ");
-				for (int i = 0; i < (RT_SLOT_IDX_LIMIT / BITS_PER_BYTE); i++)
+				for (int i = 0; i < (RT_FANOUT_48_MAX / BITS_PER_BYTE); i++)
 				{
 					fprintf(stderr, "%s%x", sep, ((uint8 *) n48->isset)[i]);
 					sep = " ";
@@ -2802,7 +2805,7 @@ RT_DUMP_NODE(RT_NODE * node)
 				char *sep = "";
 
 				fprintf(stderr, "isset-bitmap: ");
-				for (int i = 0; i < (RT_SLOT_IDX_LIMIT / BITS_PER_BYTE); i++)
+				for (int i = 0; i < (RT_FANOUT_256 / BITS_PER_BYTE); i++)
 				{
 					fprintf(stderr, "%s%x", sep, ((uint8 *) n256->isset)[i]);
 					sep = " ";
@@ -2860,7 +2863,6 @@ RT_DUMP_NODE(RT_NODE * node)
 #undef RT_NODE_MUST_GROW
 #undef RT_NODE_KIND_COUNT
 #undef RT_SIZE_CLASS_COUNT
-#undef RT_SLOT_IDX_LIMIT
 #undef RT_INVALID_SLOT_IDX
 #undef RT_SLAB_BLOCK_SIZE
 #undef RT_RADIX_TREE_MAGIC
