Streaming replication - unable to stop the standby

Stefan Kaltenbrunner <stefan@kaltenbrunner.cc> writes:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems
quite easy to end up in a situation where you have a standby that seems
to be stuck in:

$ psql -p 5433
psql: FATAL: the database system is shutting down

but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during
earlier testing) by simply having the master iterate between a pgbench
run and "idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Hm, I haven't pushed this hard but "pg_ctl stop" seems to stop the
standby for me. Which subprocesses of the slave postmaster are still
around? Could you attach to them with gdb and get stack traces?

regards, tom lane

On Mon, May 3, 2010 at 2:04 PM, Stefan Kaltenbrunner
<stefan@kaltenbrunner.cc> wrote:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems quite
easy to end up in a situation where you have a standby that seems to be
stuck in:

$ psql -p 5433
psql: FATAL:  the database system is shutting down

but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during earlier
testing) by simply having the master iterate between a pgbench run and
"idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Yes - I thought it was too. Specifically, I thought I fixed it. The
default mode is 'smart' shutdown, just as it is on the primary, so it
won't shut down until all clients have disconnected, but it should
work provided you don't leave a session somewhere. Can you describe
steps to reproduce?

...Robert

Tom Lane wrote:

Stefan Kaltenbrunner <stefan@kaltenbrunner.cc> writes:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems
quite easy to end up in a situation where you have a standby that seems
to be stuck in:

$ psql -p 5433
psql: FATAL: the database system is shutting down

but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during
earlier testing) by simply having the master iterate between a pgbench
run and "idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Hm, I haven't pushed this hard but "pg_ctl stop" seems to stop the
standby for me. Which subprocesses of the slave postmaster are still
around? Could you attach to them with gdb and get stack traces?

it is not always failing to shut down - it only fails sometimes - I have
not exactly pinpointed yet what it is causing this but the standby is in
a weird state now:

* the master is currently idle
* the standby has no connections at all

logs from the standby:

FATAL: the database system is shutting down
FATAL: the database system is shutting down
FATAL: replication terminated by primary server
LOG: restored log file "000000010000001900000054" from archive
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No
such file or directory
LOG: record with zero length at 19/55000078
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No
such file or directory
FATAL: could not connect to the primary server: could not connect to
server: Connection refused
Is the server running on host "localhost" and accepting
TCP/IP connections on port 5432?
could not connect to server: Connection refused
Is the server running on host "localhost" and accepting
TCP/IP connections on port 5432?

cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No
such file or directory
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No
such file or directory
LOG: streaming replication successfully connected to primary
FATAL: the database system is shutting down

the first two "FATAL: the database system is shutting down" are from me
trying to connect using psql after i noticed that pg_ctl failed to
shutdown the slave.
The next thing I tried was restarting the master - which lead to the
following logs and the standby noticing that and reconnecting but you
cannot actually connect...

process tree for the standby is:

29523 pts/2 S 0:00 /home/postgres9/pginst/bin/postgres -D
/mnt/space/pgdata_standby
29524 ? Ss 0:06 \_ postgres: startup process waiting for
000000010000001900000055
29529 ? Ss 0:00 \_ postgres: writer process

29835 ? Ss 0:00 \_ postgres: wal receiver process
streaming 19/55000078

Stefan

Robert Haas wrote:

On Mon, May 3, 2010 at 2:04 PM, Stefan Kaltenbrunner
<stefan@kaltenbrunner.cc> wrote:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems quite
easy to end up in a situation where you have a standby that seems to be
stuck in:

$ psql -p 5433
psql: FATAL: the database system is shutting down

but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during earlier
testing) by simply having the master iterate between a pgbench run and
"idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Yes - I thought it was too. Specifically, I thought I fixed it. The
default mode is 'smart' shutdown, just as it is on the primary, so it
won't shut down until all clients have disconnected, but it should
work provided you don't leave a session somewhere. Can you describe
steps to reproduce?

well this is basically master and standby on the same box - with the
master doing short pgbench interleaved with a "sleep 20", the standby is
doing nothing in terms of queries and just executing pg_ctl restart in a
loop(simulating a typical maintainance reboot of a standby).

Stefan

On Mon, May 3, 2010 at 2:22 PM, Stefan Kaltenbrunner
<stefan@kaltenbrunner.cc> wrote:

Tom Lane wrote:

Stefan Kaltenbrunner <stefan@kaltenbrunner.cc> writes:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems quite
easy to end up in a situation where you have a standby that seems to be
stuck in:

$ psql -p 5433
psql: FATAL:  the database system is shutting down

but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during earlier
testing) by simply having the master iterate between a pgbench run and
"idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Hm, I haven't pushed this hard but "pg_ctl stop" seems to stop the
standby for me.  Which subprocesses of the slave postmaster are still
around?  Could you attach to them with gdb and get stack traces?

it is not always failing to shut down - it only fails sometimes - I have not
exactly pinpointed yet what it is causing this but the standby is in a weird
state now:

* the master is currently idle
* the standby has no connections at all

logs from the standby:

FATAL:  the database system is shutting down
FATAL:  the database system is shutting down
FATAL:  replication terminated by primary server
LOG:  restored log file "000000010000001900000054" from archive
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
LOG:  record with zero length at 19/55000078
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
FATAL:  could not connect to the primary server: could not connect to
server: Connection refused
               Is the server running on host "localhost" and accepting
               TCP/IP connections on port 5432?
       could not connect to server: Connection refused
               Is the server running on host "localhost" and accepting
               TCP/IP connections on port 5432?

cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
LOG:  streaming replication successfully connected to primary
FATAL:  the database system is shutting down

the first two "FATAL: the database system is shutting down" are from me
trying to connect using psql after i noticed that pg_ctl failed to shutdown
the slave.
The next thing I tried was restarting the master - which lead to the
following logs and the standby noticing that and reconnecting but you cannot
actually connect...

process tree for the standby is:

29523 pts/2    S      0:00 /home/postgres9/pginst/bin/postgres -D
/mnt/space/pgdata_standby
29524 ?        Ss     0:06  \_ postgres: startup process   waiting for
000000010000001900000055
29529 ?        Ss     0:00  \_ postgres: writer process
29835 ?        Ss     0:00  \_ postgres: wal receiver process streaming
19/55000078

<uninformed-speculation>

Hmm. When I committed that patch to fix smart shutdown on the
standby, we discussed the fact that the startup process can't simply
release its locks and die at shutdown time because the locks it holds
prevent other backends from seeing the database in an inconsistent
state. Therefore, if we were to terminate recovery as soon as the
smart shutdown request is received, we might never complete, because a
backend might be waiting on a lock that will never get released. If
that's really a danger scenario, then it follows that we might also
fail to shut down if we can't connect to the primary, because we might
not be able to replay enough WAL to release the locks the remaining
backends are waiting for. That sort of looks like what is happening
to you, except based on your test scenario I can't figure out where
this came from:

FATAL: replication terminated by primary server

</uninformed-speculation>

...Robert

Robert Haas wrote:

On Mon, May 3, 2010 at 2:22 PM, Stefan Kaltenbrunner
<stefan@kaltenbrunner.cc> wrote:

Tom Lane wrote:

Stefan Kaltenbrunner <stefan@kaltenbrunner.cc> writes:

I'm currently testing SR/HS in 9.0beta1 and I noticed that it seems quite
easy to end up in a situation where you have a standby that seems to be
stuck in:
$ psql -p 5433
psql: FATAL: the database system is shutting down
but not not actually shuting down ever. I ran into that a few times now
(mostly because I'm trying to chase a recovery issue I hit during earlier
testing) by simply having the master iterate between a pgbench run and
"idle" while simple doing pg_ctl restart in a loop on the standby.
I do vaguely recall some discussions of that but I thought the issue git
settled somehow?

Hm, I haven't pushed this hard but "pg_ctl stop" seems to stop the
standby for me. Which subprocesses of the slave postmaster are still
around? Could you attach to them with gdb and get stack traces?

it is not always failing to shut down - it only fails sometimes - I have not
exactly pinpointed yet what it is causing this but the standby is in a weird
state now:

* the master is currently idle
* the standby has no connections at all

logs from the standby:

FATAL: the database system is shutting down
FATAL: the database system is shutting down
FATAL: replication terminated by primary server
LOG: restored log file "000000010000001900000054" from archive
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
LOG: record with zero length at 19/55000078
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
FATAL: could not connect to the primary server: could not connect to
server: Connection refused
Is the server running on host "localhost" and accepting
TCP/IP connections on port 5432?
could not connect to server: Connection refused
Is the server running on host "localhost" and accepting
TCP/IP connections on port 5432?

cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
cp: cannot stat `/mnt/space/wal-archive/000000010000001900000055': No such
file or directory
LOG: streaming replication successfully connected to primary
FATAL: the database system is shutting down

the first two "FATAL: the database system is shutting down" are from me
trying to connect using psql after i noticed that pg_ctl failed to shutdown
the slave.
The next thing I tried was restarting the master - which lead to the
following logs and the standby noticing that and reconnecting but you cannot
actually connect...

process tree for the standby is:

29523 pts/2 S 0:00 /home/postgres9/pginst/bin/postgres -D
/mnt/space/pgdata_standby
29524 ? Ss 0:06 \_ postgres: startup process waiting for
000000010000001900000055
29529 ? Ss 0:00 \_ postgres: writer process
29835 ? Ss 0:00 \_ postgres: wal receiver process streaming
19/55000078

<uninformed-speculation>

Hmm. When I committed that patch to fix smart shutdown on the
standby, we discussed the fact that the startup process can't simply
release its locks and die at shutdown time because the locks it holds
prevent other backends from seeing the database in an inconsistent
state. Therefore, if we were to terminate recovery as soon as the
smart shutdown request is received, we might never complete, because a
backend might be waiting on a lock that will never get released. If
that's really a danger scenario, then it follows that we might also
fail to shut down if we can't connect to the primary, because we might
not be able to replay enough WAL to release the locks the remaining
backends are waiting for. That sort of looks like what is happening
to you, except based on your test scenario I can't figure out where
this came from:

FATAL: replication terminated by primary server

as I said before I restarted the master at that point, the standby
logged the above, restored 000000010000001900000054 from the archive,
tried reconnecting and logged the "connection refused". a few seconds
later the master was up again and the standby succeeded in reconnecting.

Stefan

Robert Haas <robertmhaas@gmail.com> writes:

Hmm. When I committed that patch to fix smart shutdown on the
standby, we discussed the fact that the startup process can't simply
release its locks and die at shutdown time because the locks it holds
prevent other backends from seeing the database in an inconsistent
state. Therefore, if we were to terminate recovery as soon as the
smart shutdown request is received, we might never complete, because a
backend might be waiting on a lock that will never get released. If
that's really a danger scenario, then it follows that we might also
fail to shut down if we can't connect to the primary, because we might
not be able to replay enough WAL to release the locks the remaining
backends are waiting for. That sort of looks like what is happening
to you, except based on your test scenario I can't figure out where
this came from:

FATAL: replication terminated by primary server

I suspect you have it right, because my experiments where the standby
did shut down correctly were all done with an idle master.

Seems like we could go ahead and forcibly kill the startup process *once
all the standby backends are gone*. There is then no need to worry
about not releasing locks, and re-establishing a consistent state when
we later restart is logic that we have to have anyway.

regards, tom lane

On Mon, May 3, 2010 at 2:47 PM, Tom Lane <tgl@sss.pgh.pa.us> wrote:

Robert Haas <robertmhaas@gmail.com> writes:

Hmm.  When I committed that patch to fix smart shutdown on the
standby, we discussed the fact that the startup process can't simply
release its locks and die at shutdown time because the locks it holds
prevent other backends from seeing the database in an inconsistent
state.  Therefore, if we were to terminate recovery as soon as the
smart shutdown request is received, we might never complete, because a
backend might be waiting on a lock that will never get released.  If
that's really a danger scenario, then it follows that we might also
fail to shut down if we can't connect to the primary, because we might
not be able to replay enough WAL to release the locks the remaining
backends are waiting for.  That sort of looks like what is happening
to you, except based on your test scenario I can't figure out where
this came from:

FATAL:  replication terminated by primary server

I suspect you have it right, because my experiments where the standby
did shut down correctly were all done with an idle master.

Seems like we could go ahead and forcibly kill the startup process *once
all the standby backends are gone*.  There is then no need to worry
about not releasing locks, and re-establishing a consistent state when
we later restart is logic that we have to have anyway.

That's exactly what we already do. The problem is that smart shutdown
doesn't actually kill off the standby backends - it waits for them to
exit on their own. Except, if they're blocking on a lock that's never
going to get released, then they never do.

...Robert