[PATCH] check for ctags utility in make_ctags

В письме от понедельник, 31 декабря 2018 г. 19:04:08 MSK пользователь Nikolay
Shaplov написал:

I'd like to propose a small patch for make_ctags script. It checks if ctags
utility is intalled or not. If not it reports an error and advises to
install ctags.

Oups. I've misplaced '&' character :-)

Here is the right version

On Mon, Dec 31, 2018 at 07:19:39PM +0300, Nikolay Shaplov wrote:

В письме от понедельник, 31 декабря 2018 г. 19:04:08 MSK пользователь Nikolay
Shaplov написал:

I'd like to propose a small patch for make_ctags script. It checks if ctags
utility is intalled or not. If not it reports an error and advises to
install ctags.

Oups. I've misplaced '&' character :-)

Not sure if that's something worse bothering about, but you could do
the same in src/tools/make_etags.
--
Michael

В письме от вторник, 1 января 2019 г. 11:24:11 MSK пользователь Michael
Paquier написал:

Not sure if that's something worse bothering about, but you could do
the same in src/tools/make_etags.

Good idea. Done.

(I did not do it in the first place because I do not use etags and can't
properly check it, but really if some files are created, then everything should
be working well. This is good enough check :-) )

On 01/01/2019 17:44, Nikolay Shaplov wrote:

+if [ ! $(command -v ctags) ]
+then
+  echo "'ctags' utility is not found" 1>&2
+  echo "Please install 'ctags' to run make_ctags" 1>&2
+  exit 1
+fi

This assumes that the ctags and etags programs are part of packages of
the same name. I don't think that is always the case.

--
Peter Eisentraut http://www.2ndQuadrant.com/
PostgreSQL Development, 24x7 Support, Remote DBA, Training & Services

Peter Eisentraut <peter.eisentraut@2ndquadrant.com> writes:

On 01/01/2019 17:44, Nikolay Shaplov wrote:

+if [ ! $(command -v ctags) ]
+then
+  echo "'ctags' utility is not found" 1>&2
+  echo "Please install 'ctags' to run make_ctags" 1>&2
+  exit 1
+fi

This assumes that the ctags and etags programs are part of packages of
the same name. I don't think that is always the case.

In fact, that's demonstrably not so: on my RHEL6 and Fedora boxes,
/usr/bin/etags isn't owned by any package, because it's a symlink
managed by the "alternatives" system. It points to /usr/bin/etags.emacs
which is owned by the emacs-common package. So dropping the advice
about how to fix the problem seems like a good plan.

regards, tom lane

On Wed, Jan 02, 2019 at 11:35:46AM -0500, Tom Lane wrote:

In fact, that's demonstrably not so: on my RHEL6 and Fedora boxes,
/usr/bin/etags isn't owned by any package, because it's a symlink
managed by the "alternatives" system. It points to /usr/bin/etags.emacs
which is owned by the emacs-common package. So dropping the advice
about how to fix the problem seems like a good plan.

+1, let's keep it simple.  I would just use "ctags/etags not found"
as error message.
--
Michael

В письме от четверг, 3 января 2019 г. 10:03:53 MSK пользователь Michael
Paquier написал:

On Wed, Jan 02, 2019 at 11:35:46AM -0500, Tom Lane wrote:

In fact, that's demonstrably not so: on my RHEL6 and Fedora boxes,
/usr/bin/etags isn't owned by any package, because it's a symlink
managed by the "alternatives" system. It points to /usr/bin/etags.emacs
which is owned by the emacs-common package. So dropping the advice
about how to fix the problem seems like a good plan.

+1, let's keep it simple. I would just use "ctags/etags not found"
as error message.

Actually I was trying to say "Please install 'ctags' [utility] to run
make_ctags". But if all of you read it as "Please install 'ctags' [package] to
run make_ctags", then it is really better to drop the advice.

So I removed it. See the patch.

On 03/01/2019 12:15, Nikolay Shaplov wrote:

+1, let's keep it simple. I would just use "ctags/etags not found"
as error message.

Actually I was trying to say "Please install 'ctags' [utility] to run
make_ctags". But if all of you read it as "Please install 'ctags' [package] to
run make_ctags", then it is really better to drop the advice.

So I removed it. See the patch.

A few more comments.

I don't know how portable command -v is. Some systems have a /bin/sh
that is pre-POSIX. Same with $(...).

If etags is not installed, the current script prints

xargs: etags: No such file or directory

I don't see the need to do more than that, especially if it makes the
script twice as long.

(Personally, I'd recommend removing make_etags altogether and using GNU
Global for Emacs.)

--
Peter Eisentraut http://www.2ndQuadrant.com/
PostgreSQL Development, 24x7 Support, Remote DBA, Training & Services

В письме от четверг, 3 января 2019 г. 12:52:36 MSK пользователь Peter
Eisentraut написал:

+1, let's keep it simple. I would just use "ctags/etags not found"
as error message.

Actually I was trying to say "Please install 'ctags' [utility] to run
make_ctags". But if all of you read it as "Please install 'ctags'
[package] to run make_ctags", then it is really better to drop the
advice.

So I removed it. See the patch.

A few more comments.

I don't know how portable command -v is. Some systems have a /bin/sh
that is pre-POSIX. Same with $(...).

Do you know how to obtain such a shell in Debian? I have dash for sh, and it
knows both commands -v and $(). And I have no idea how to get more simple one.
Do you have one?

Do you know the way how to check if shell is pre-POSIX and just disable the
check in this case.

Or can you offer some another check that will satisfy you as a potential user
of pre-POSIX shell? The check that will somehow report that ctags _executable_
file is missing.

If etags is not installed, the current script prints

xargs: etags: No such file or directory

make_ctags prints

xargs: ctags: No such file or directory
sort: cannot read: tags: No such file or directory

For me it is not good enough error message, it says it can't find some ctags|
etags file. But says nothing that is is an utility, that is missing...

So I would try to find better way to report that ctags utility is missing.

PS Vitus, I added you to CC, because I know that you are quite good in bash
scripting, may be you would give some good ideas I do not have.

Nikolay Shaplov <dhyan@nataraj.su> writes:

В письме от четверг, 3 января 2019 г. 12:52:36 MSK пользователь Peter
Eisentraut написал:

I don't know how portable command -v is. Some systems have a /bin/sh
that is pre-POSIX. Same with $(...).

Do you know how to obtain such a shell in Debian?

TBH, when I first saw this patch, I had the same reaction as Peter,
ie I wondered how portable this was. However, upon investigation:

1. "command -v <something>" is specified by Single Unix Spec v2,
which we've considered as our baseline portability requirement
for a good long time now.

2. Even my pet dinosaur HPUX 10.20 box recognizes it. I do not
believe anybody working on PG these days is using something older.

3. These scripts aren't part of any build or runtime process,
they're only useful for development. We've long felt that it's
okay to have higher requirements for development environments
than for production. Besides, do you really think anybody's
going to be doing PG v12+ development on a box with a pre-SUSv2
shell and a C99 compiler?

We need not get into the question of whether $(...) is portable,
because the way it's being used is not: if command -v does not
find the target command, it prints nothing, so that at least
some systems will do this:

$ if [ ! $(command -v notetags) ]

then
echo not found
fi

ksh: test: argument expected

(I'm not very sure why bash fails to act that way, actually.
"!" with nothing after it shouldn't be valid syntax for test(1),
you'd think.)

The correct way to code this is to depend on the exit code,
not the text output:

if command -v etags >/dev/null
then
: ok
else
echo etags not found
exit 1
fi

We could alternatively try to use "which" in the same way,
but I'm dubious that it's more portable than "command".
(AFAICT, "which" is *not* in POSIX.)

regards, tom lane

On 1/6/19 12:16 PM, Tom Lane wrote:

The correct way to code this is to depend on the exit code,
not the text output:

if command -v etags >/dev/null
then
: ok
else
echo etags not found
exit 1
fi

more succinctly,

command -v etags >/dev/null || { echo etags not found; exit 1;}

We could alternatively try to use "which" in the same way,
but I'm dubious that it's more portable than "command".
(AFAICT, "which" is *not* in POSIX.)

Indeed. I know I have some systems where it's lacking.

cheers

andrew

--
Andrew Dunstan https://www.2ndQuadrant.com
PostgreSQL Development, 24x7 Support, Remote DBA, Training & Services

В письме от воскресенье, 6 января 2019 г. 17:50:36 MSK пользователь Andrew
Dunstan написал:

The correct way to code this is to depend on the exit code,
not the text output:

if command -v etags >/dev/null
then
: ok
else
echo etags not found
exit 1
fi

more succinctly,
command -v etags >/dev/null || { echo etags not found; exit 1;}

If it is good enough for you, then is is good for me for sure...
Imported it to the patch.

Nikolay Shaplov <dhyan@nataraj.su> writes:

[ check-for-ctags-in-make_ctags_v5.diff ]

Pushed with minor editorialization on the wording of the error messages.

regards, tom lane