How to update multiple rows

On 26 Oct 2010, at 9:07, venkat wrote:

Dear All,

I want to update multiple row in single query.I am trying for below query.I am getting error as

"ERROR: more than one row returned by a subquery used as an expression
SQL state: 21000"

You're probably looking for UPDATE table FROM other_table.

That said, I think your subqueries are rather under-constrained - you don't correlate the records in your subqueries to the records you're updating at all! The result will be that all your rows will be based on the last row selected by each subquery. I can't imagine why you'd want that, so I assume you don't.

Here is my Query.

update parcelsdata set gid=(select random() * 10),
kasarano=(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select (st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line, the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)

where kasarano='1' and murabano='119'

You would rewrite that to, for example:

update parcelsdata
set gid = random() * 10,
kasarano = pd2.kasarano,
murabano = pd2.murabano

from parcelsdata pd2
where id = pd2.id -- substitute for whatever your primary key/condition is

and kasarano = '1'
and murabano = '119'

Yeah, I left out the geometry thing as I'm too lazy to figure out where your brackets start and end ;)

Alban Hertroys

--
Screwing up is an excellent way to attach something to the ceiling.

!DSPAM:737,4cc68b1c10291756917282!

Dear Alban,

Thanks for your great response.I am not able to compile the query which you
have given..I am not able to understand.Please alter my code.

(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select
(st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as
the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line,
the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)
if i compile above code , its giving me 2 records.. and when i try to update
the table i am getting using below code...

update parcelsdata set gid=(select random() * 10),
kasarano=(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select
(st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as
the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line,
the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)

I am getting below error..
"ERROR: more than one row returned by a subquery used as an expression
SQL state: 21000"

Please let me know where I am doing wrong.. guide me how to update those
multiple records..I am waiting for your great response.

Thanks and Regards,

Venkat

On Tue, Oct 26, 2010 at 1:32 PM, Alban Hertroys <
dalroi@solfertje.student.utwente.nl> wrote:

If you do not understand what you are doing, it might be a good idea to find someone in your organization who understands SQL.
You were given the suggestion UPDATE <table> SET <column list > FROM <from list > ... which is documented here:
http://www.postgresql.org/docs/9.0/interactive/sql-update.html
In the end, your query should probably end up as an update with an inner join in the FROM section. Do you know what the unique indexes are on the tables in question? If you do not use unique indexes in the join, or some other way to ensure that there is a one to one correspondence, you will be altering great big patches of data.

If you are performing an update query, which modifies the data, you should be very careful to get it right. It is risky to have someone else write your query for you, because it is your organization that is intimately familiar with your data.

Do you have any SQL experts in your company? These two kinds of knowledge are essential: 1) Knowledge of SQL 2) Knowledge of your company's data
Without both of those qualifications, the query produced will not create correct results.

From: pgsql-general-owner@postgresql.org [mailto:pgsql-general-owner@postgresql.org] On Behalf Of venkat
Sent: Tuesday, October 26, 2010 2:15 AM
To: Alban Hertroys
Cc: pgsql-general@postgresql.org; pgsql-sql@postgresql.org
Subject: Re: [GENERAL] How to update multiple rows

Dear Alban,

Thanks for your great response.I am not able to compile the query which you have given..I am not able to understand.Please alter my code.

(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select (st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line, the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)
if i compile above code , its giving me 2 records.. and when i try to update the table i am getting using below code...

update parcelsdata set gid=(select random() * 10),
kasarano=(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select (st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line, the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)

I am getting below error..
"ERROR: more than one row returned by a subquery used as an expression
SQL state: 21000"

Please let me know where I am doing wrong.. guide me how to update those multiple records..I am waiting for your great response.

Thanks and Regards,

Venkat
On Tue, Oct 26, 2010 at 1:32 PM, Alban Hertroys <dalroi@solfertje.student.utwente.nl<mailto:dalroi@solfertje.student.utwente.nl>> wrote:
On 26 Oct 2010, at 9:07, venkat wrote:

Dear All,

I want to update multiple row in single query.I am trying for below query.I am getting error as

"ERROR: more than one row returned by a subquery used as an expression
SQL state: 21000"

You're probably looking for UPDATE table FROM other_table.

That said, I think your subqueries are rather under-constrained - you don't correlate the records in your subqueries to the records you're updating at all! The result will be that all your rows will be based on the last row selected by each subquery. I can't imagine why you'd want that, so I assume you don't.

Here is my Query.

update parcelsdata set gid=(select random() * 10),
kasarano=(select kasarano from parcelsdata),
murabano=(select murabano from parcelsdata),
the_geom = (select (st_dump(st_polygonize(st_union(st_boundary(the_geom), the_line)))).geom as the_geom from
(select gid,kasarano,murabano,st_linefromtext('LINESTRING('
||(st_xmin(the_geom)-1)::text||'
'||(st_ymax(the_geom)-the_length)||',
'||st_xmax(the_geom)+1||'
'||st_ymax(the_geom)-the_length||')',24047) as the_line, the_geom from
(select 100 as the_length, * from parcelsdata) a) b
where gid = 113 GROUP BY gid,kasarano,murabano)

where kasarano='1' and murabano='119'

You would rewrite that to, for example:

update parcelsdata
set gid = random() * 10,
kasarano = pd2.kasarano,
murabano = pd2.murabano

from parcelsdata pd2
where id = pd2.id<http://pd2.id&gt; -- substitute for whatever your primary key/condition is

and kasarano = '1'
and murabano = '119'

Yeah, I left out the geometry thing as I'm too lazy to figure out where your brackets start and end ;)

Alban Hertroys

--
Screwing up is an excellent way to attach something to the ceiling.

!DSPAM:1184,4cc68b1610291250718568!