pglogical install errors openSUSE Leap 42.1
In the process of trying to use pglogical to upgrade from 9.4 to 11.7. Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar from 2nsQuadrant site. I am getting the following error during make clean all command:
o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error: gssapi/gssapi.h: No such file or directory
#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure what package I am missing and should install on the OS to get this to compile. Currently I have only one gssapi related package installed on this system
S | Name | Summary | Type
--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism | package
Thanks,
Brian
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar from
FYI 42.1 is coming up on 3 years past EOL so you might have general
issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean all
command:
Did you follow the source install instructions here?:
https://www.2ndquadrant.com/en/resources/pglogical/pglogical-installation-instructions/
o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
�������������������������� ^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure what
package I am missing and should install on the OS to get this to
compile. Currently I have only one gssapi related package installed on
this systemS | Name��������������������� | Summary����������������������������� | Type
--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi�������� | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block, the
typed name of the sender, nor anything else in this message is intended
to constitute an electronic signature unless a specific statement to the
contrary is included in this message. /
--
Adrian Klaver
adrian.klaver@aklaver.com
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar from
FYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:
Did you follow the source install instructions here?:
o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure what
package I am missing and should install on the OS to get this to
compile. Currently I have only one gssapi related package installed on
this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /
--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:Did you follow the source install instructions here?:
o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure what
package I am missing and should install on the OS to get this to
compile. Currently I have only one gssapi related package installed on
this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d=D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8hu
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8RTu
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this to
compile. Currently I have only one gssapi related package installed
on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d=D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8hu
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8RTu
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this to
compile. Currently I have only one gssapi related package installed
on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | package
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8RT
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this
to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
On 2/18/20 1:56 PM, Bellrose, Brian wrote:
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | packagep
Alright that looks good. You may still need to play Whack-a-Mole with
devel libraries.
I am curious how you got to 9.4.25 via an update, given that this
Postgres version was released well past the OS EOL?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make clean
all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8RT
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this
to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the sender
immediately and delete the original. Neither this information block,
the typed name of the sender, nor anything else in this message is
intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
I found a repository that offered it and added the repo.
https://download.opensuse.org/repositories/home:vjt:ifad/openSUSE_Leap_42.1/home:vjt:ifad.repo
Only time will tell if that was a wise decision. I only need to it to get me through my upgrade. Moving all these to RHEL 8.1 and Postgres 11.7. Going to use pglogical to try and reduce downtime.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 5:00 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
On 2/18/20 1:56 PM, Bellrose, Brian wrote:
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | packagep
Alright that looks good. You may still need to play Whack-a-Mole with devel libraries.
I am curious how you got to 9.4.25 via an update, given that this Postgres version was released well past the OS EOL?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make
clean all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d
=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8
h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8R
T
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this
to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of
the contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the sender
immediately and delete the original. Neither this information
block, the typed name of the sender, nor anything else in this
message is intended to constitute an electronic signature unless a
specific statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
On 2/18/20 2:07 PM, Bellrose, Brian wrote:
I found a repository that offered it and added the repo.
https://download.opensuse.org/repositories/home:vjt:ifad/openSUSE_Leap_42.1/home:vjt:ifad.repoOnly time will tell if that was a wise decision. I only need to it to get me through my upgrade. Moving all these to RHEL 8.1 and Postgres 11.7. Going to use pglogical to try and reduce downtime.
Well that is interesting:
https://build.opensuse.org/project/show/home:vjt:ifad
a UN agency:
Brian
--
Adrian Klaver
adrian.klaver@aklaver.com
Hi,
I'm not an OpenSuse expert, but I know a bit about building pglogical...
I've been able to compile pglogical on a leap 42.3 docker image
In the beginning, I tried to compile pglogical using the very same
postgresql packages you were using,
but for some reasons, I was consistently receiving linking errors.
After some debugging, and packages digging, I found some official SUSE
packages for leap 42
So I decided to give them a try.
Here is the URL to the repo:
https://download.opensuse.org/repositories/openSUSE:/Leap:/42.3:/Update/ports/openSUSE:Leap:42.3:Update.repo
Note: here https://download.opensuse.org/repositories/openSUSE:/Leap:/
you can find also repositories for older leap versions. including 42.1
An important suggestion I can give you is: please use a checkout from
git instead of using a tar file containing the source code.
This because pglogical uses a git submodule for the pglogical_dump component.
Here is the link to the 2ndquadrant source repository:
https://github.com/2ndQuadrant/pglogical
Here is the sequence of action I performed:
zypper addrepo https://download.opensuse.org/repositories/openSUSE:/Leap:/42.3:/Update/ports/openSUSE:Leap:42.3:Update.repo
zypper install postgresql94-devel openssl-devel libxml2-devel
libxslt-devel pam-devel readline-devel zlib-devel krb5-devel
e2fsprogs-devel libselinux-devel git vim
then I cloned the pglogical git:
git clone https://github.com/2ndQuadrant/pglogical.git
(note, I used the https link because in docker I was having some
issues using the ssh protocol. if you face the same issue update the
.gitmodule file inside the repository checkout to use the https link
to pglogical_dump https://github.com/2ndQuadrant/pglogical_dump.git )
git checkout REL2_3_0 (this because I wanted to use the latest
released code. feel free to use another tag if you wish)
git submodule sync
git submodule init
git submodule update
now the repository is up to date.
PATH=/usr/lib/postgresql94/bin:$PATH make USE_PGXS=1 clean all
PATH=/usr/lib/postgresql94/bin:$PATH make USE_PGXS=1 install
(as you can notice the path is different from the documentation as
suse uses different default paths from rhel and debian)
This worked for me on OpenSUSE leap 42.3, PLEASE let me know if it
works for you too.
Ciao,
Giulio
On Tue, 18 Feb 2020 at 23:07, Bellrose, Brian <brian.bellrose@wabtec.com> wrote:
I found a repository that offered it and added the repo.
https://download.opensuse.org/repositories/home:vjt:ifad/openSUSE_Leap_42.1/home:vjt:ifad.repoOnly time will tell if that was a wise decision. I only need to it to get me through my upgrade. Moving all these to RHEL 8.1 and Postgres 11.7. Going to use pglogical to try and reduce downtime.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 5:00 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 1:56 PM, Bellrose, Brian wrote:
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | packagepAlright that looks good. You may still need to play Whack-a-Mole with devel libraries.
I am curious how you got to 9.4.25 via an update, given that this Postgres version was released well past the OS EOL?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make
clean all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d
=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8
h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8R
T
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this
to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of
the contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the sender
immediately and delete the original. Neither this information
block, the typed name of the sender, nor anything else in this
message is intended to constitute an electronic signature unless a
specific statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Giulio Calacoci - 2ndQuadrant
PostgreSQL Training, Services and Support
giulio.calacoci@2ndQuadrant.it | www.2ndQuadrant.it
Thanks for the info. I will investigate these steps.
Brian
-----Original Message-----
From: Giulio Calacoci <giulio.calacoci@2ndquadrant.it>
Sent: Wednesday, February 19, 2020 9:07 AM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>
Cc: Adrian Klaver <adrian.klaver@aklaver.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
Hi,
I'm not an OpenSuse expert, but I know a bit about building pglogical...
I've been able to compile pglogical on a leap 42.3 docker image
In the beginning, I tried to compile pglogical using the very same postgresql packages you were using, but for some reasons, I was consistently receiving linking errors.
After some debugging, and packages digging, I found some official SUSE packages for leap 42 So I decided to give them a try.
Here is the URL to the repo:
https://urldefense.proofpoint.com/v2/url?u=https-3A__download.opensuse.org_repositories_openSUSE-3A_Leap-3A_42.3-3A_Update_ports_openSUSE-3ALeap-3A42.3-3AUpdate.repo&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=Y25bebtRT7XasHdr19dUMsGiUfJVFJ7cyK88MiaC1GE&e=
Note: here https://urldefense.proofpoint.com/v2/url?u=https-3A__download.opensuse.org_repositories_openSUSE-3A_Leap-3A_&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=kKXgcuSUbzsujz8MMh0GcsLa5Yy7-Wsj8iI3wH2DD7E&e=
you can find also repositories for older leap versions. including 42.1
An important suggestion I can give you is: please use a checkout from git instead of using a tar file containing the source code.
This because pglogical uses a git submodule for the pglogical_dump component.
Here is the link to the 2ndquadrant source repository:
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_2ndQuadrant_pglogical&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=f6n6qhkn5ychzPwu3NM6-Y7gPkZ0XkHjhmWKg4_MxNI&e=
Here is the sequence of action I performed:
zypper install postgresql94-devel openssl-devel libxml2-devel libxslt-devel pam-devel readline-devel zlib-devel krb5-devel e2fsprogs-devel libselinux-devel git vim
then I cloned the pglogical git:
git clone https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_2ndQuadrant_pglogical.git&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=dGJuVm7AZqax8w_zo12SgV2Sidcm6TmsftvP151tv2I&e=
(note, I used the https link because in docker I was having some issues using the ssh protocol. if you face the same issue update the .gitmodule file inside the repository checkout to use the https link to pglogical_dump https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_2ndQuadrant_pglogical-5Fdump.git&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=5d5i8InHaQ8ITofwHCD7qwHQ_wvqPvKl9kxLzap3PHA&e= ) git checkout REL2_3_0 (this because I wanted to use the latest released code. feel free to use another tag if you wish) git submodule sync git submodule init git submodule update
now the repository is up to date.
PATH=/usr/lib/postgresql94/bin:$PATH make USE_PGXS=1 clean all PATH=/usr/lib/postgresql94/bin:$PATH make USE_PGXS=1 install
(as you can notice the path is different from the documentation as suse uses different default paths from rhel and debian)
This worked for me on OpenSUSE leap 42.3, PLEASE let me know if it works for you too.
Ciao,
Giulio
On Tue, 18 Feb 2020 at 23:07, Bellrose, Brian <brian.bellrose@wabtec.com> wrote:
I found a repository that offered it and added the repo.
https://urldefense.proofpoint.com/v2/url?u=https-3A__download.opensuse
.org_repositories_home-3Avjt-3Aifad_openSUSE-5FLeap-5F42.1_home-3Avjt-
3Aifad.repo&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBL
vYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=
nvwV34wE61EoyLrFp7Y9w1OHj_UHjOVDahM6y3lveT4&e=Only time will tell if that was a wise decision. I only need to it to get me through my upgrade. Moving all these to RHEL 8.1 and Postgres 11.7. Going to use pglogical to try and reduce downtime.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 5:00 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 1:56 PM, Bellrose, Brian wrote:
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | packagepAlright that looks good. You may still need to play Whack-a-Mole with devel libraries.
I am curious how you got to 9.4.25 via an update, given that this Postgres version was released well past the OS EOL?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make
clean all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_
&d
=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7
C8
h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp
8R
T
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get
this to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized
use, reproduction, dissemination, distribution or other
disclosure of the contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the
sender immediately and delete the original. Neither this
information block, the typed name of the sender, nor anything
else in this message is intended to constitute an electronic
signature unless a specific statement to the contrary is included
in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Giulio Calacoci - 2ndQuadrant
PostgreSQL Training, Services and Support giulio.calacoci@2ndQuadrant.it | https://urldefense.proofpoint.com/v2/url?u=http-3A__www.2ndQuadrant.it&d=DwIFaQ&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8huZnWyCI&m=YCSK4nrYEqdAY-8Bp8EfSfbaQsdFk6R8BWkTYwfFz0s&s=bahqvQSYcdOuPYiiDLrkC8skTOmjHE2PvhN-FkIglzE&e=
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
FYI, I was able to get it to work with the following steps:
# zypper update curl openssl
# zypper install gcc openssl-devel krb5-devel
# zypper install postgresql94-9.4.25-61.1.x86_64
Then needed to download the 2.2.0 tarball from 2ndQuadrant as the newer versions would not compile:
# bzip2 -d pglogical-2.2.0.tar.bz2
# tar -xvf pglogical-2.2.0.tar
# cd pglogical-2.2.0/
# export PATH=/usr/lib/postgresql94/bin:$PATH
# make USE_PGXS=1 clean all
# make USE_PGXS=1 install
And I was good after that. Added the pglogical to shared_preload_libraries and started the cluster. Thanks for the help.
Brian
-----Original Message-----
From: Bellrose, Brian
Sent: Tuesday, February 18, 2020 5:07 PM
To: Adrian Klaver <adrian.klaver@aklaver.com>; pgsql-general@lists.postgresql.org
Subject: RE: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
I found a repository that offered it and added the repo.
https://download.opensuse.org/repositories/home:vjt:ifad/openSUSE_Leap_42.1/home:vjt:ifad.repo
Only time will tell if that was a wise decision. I only need to it to get me through my upgrade. Moving all these to RHEL 8.1 and Postgres 11.7. Going to use pglogical to try and reduce downtime.
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 5:00 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>; pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1
On 2/18/20 1:56 PM, Bellrose, Brian wrote:
Yes,
S | Name | Summary | Type
--+-----------------------+-------------------------------------------------------------------------+--------
i | postgresql94 | Basic Clients and Utilities for PostgreSQL | package
i | postgresql94-contrib | Contributed Extensions and Additions to PostgreSQL | package
i | postgresql94-devel | PostgreSQL development header files and libraries | package
i | postgresql94-plperl | The PL/Tcl, PL/Perl, and PL/Python procedural languages for PostgreSQL | package
i | postgresql94-plpython | The PL/Python Procedural Languages for PostgreSQL | package
i | postgresql94-pltcl | PL/Tcl Procedural Language for PostgreSQL | package
i | postgresql94-server | The Programs Needed to Create and Run a PostgreSQL Server | package
i | postgresql94-test | The test suite for PostgreSQL | packagep
Alright that looks good. You may still need to play Whack-a-Mole with devel libraries.
I am curious how you got to 9.4.25 via an update, given that this Postgres version was released well past the OS EOL?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:41 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 1:22 PM, Bellrose, Brian wrote:
I used zypper to install postgres. Postgres is fine... Running 9.4.25 that I updated today. So you have krb5-devel... Ok, good to know. Seems like that may be the missing link. At least I hope it is the only one.
Was postgresql94-devel also installed?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 4:19 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: Re: [EXTERNAL]: Re: pglogical install errors openSUSE Leap
42.1On 2/18/20 12:54 PM, Bellrose, Brian wrote:
Yes, I understand that this OS is very old. I can't help that. I was handed this. The reason I am trying to install pglogical is so that I can upgrade and get off this OS. Our requirements are for limited downtime so pglocical is best bet. At least I thought it was.
Yes, I followed the source install doc. Can't be really called an install doc when all it states is run a make. It has about three sentences that encompass their complete install instructions from source. No documentation on package dependencies or anything else or even what package do download. I tried 2.2.1 first and it did not work. I have gotten farther with 2.2.0, but I am getting what appears to be dependency errors. Might need to install krb5-devel. Not 100% clear though.
Well on my Leap 15.1 krb5-devel does provide gssapi.h.
How was Postgres installed on the machine?
Brian
-----Original Message-----
From: Adrian Klaver <adrian.klaver@aklaver.com>
Sent: Tuesday, February 18, 2020 3:49 PM
To: Bellrose, Brian <brian.bellrose@Wabtec.com>;
pgsql-general@lists.postgresql.org
Subject: [EXTERNAL]: Re: pglogical install errors openSUSE Leap 42.1On 2/18/20 11:39 AM, Bellrose, Brian wrote:
In the process of trying to use pglogical to upgrade from 9.4 to 11.7.
Current OS is openSUSE Leap 42.1. Downloaded pglogical-2.2.0.tar
fromFYI 42.1 is coming up on 3 years past EOL so you might have general issues with out of date libraries.
2nsQuadrant site. I am getting the following error during make
clean all
command:Did you follow the source install instructions here?:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.2ndquadrant.
c
om_en_resources_pglogical_pglogical-2Dinstallation-2Dinstructions_&d
=
D
wID-g&c=pG3N8eJDEvizGbIy8hw-0w&r=Avd8jJaAOeUVJ3AmVEriBLvYqiK8qqaP7C8
h
u
ZnWyCI&m=1vh2nbBIrcqphzYV4i690_hEEZuRS71Da5SClwjBbOw&s=1O6j3zKQdkp8R
T
u
GPAQPB44lQi_IV9goSuWDjl0pnqI&e=o pglogical_worker.c
In file included from pglogical_worker.c:17:0:
/usr/include/pgsql/server/libpq/libpq-be.h:36:27: fatal error:
gssapi/gssapi.h: No such file or directory#include <gssapi/gssapi.h>
^
compilation terminated.
<builtin>: recipe for target 'pglogical_worker.o' failed
It appears that gssapi is Kerberos related. Just not exactly sure
what package I am missing and should install on the OS to get this
to compile. Currently I have only one gssapi related package
installed on this systemS | Name | Summary |
Type--+---------------------------+--------------------------------------+--------
i | cyrus-sasl-gssapi | Plugin for the GSSAPI SASL mechanism |
packageThanks,
Brian
/This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of
the contents of this e-mail or its attachments is strictly prohibited.
If you have received this email in error, please notify the sender
immediately and delete the original. Neither this information
block, the typed name of the sender, nor anything else in this
message is intended to constitute an electronic signature unless a
specific statement to the contrary is included in this message. /--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.
--
Adrian Klaver
adrian.klaver@aklaver.com
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original. Neither this information block, the typed name of the sender, nor anything else in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.