print formated special characteres

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso Lorenzetti escribió:

Somebody help me, please.

How to make the texts are aligned with 10 characters?

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Hola Celso,

You can reproduce the same on the UNIX shell with:

$ printf "\n%-10s Fim\n%-10s Fim\n" "Variável" "Variavel"

Variável Fim
Variavel Fim

$ printf "\n%-10s Fim\n%-10s Fim\n" "VariXvel" "Variavel"

VariXvel Fim
Variavel Fim

The second test (changing the accented char 'á' by 'X'), shows that the
problem/bug is a) more generic, not only in PostgreSQL and b) has todo
with being the UTF-8 char 'á' a two byte char, while 'X' is only one
byte.

I have no solution, though at the moment...

Obrigado

matthias

--
Matthias Apitz, ✉ guru@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
Без книги нет знания, без знания нет коммунизма (Влaдимир Ильич Ленин)
Without books no knowledge - without knowledge no communism (Vladimir Ilyich Lenin)
Sin libros no hay saber - sin saber no hay comunismo. (Vladimir Ilich Lenin)

On 2020-10-17 20:51:36 +0200, Matthias Apitz wrote:

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso Lorenzetti escribió:

Somebody help me, please.

How to make the texts are aligned with 10 characters?

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Which programming language is this? PL/pgSQL?

Hola Celso,

You can reproduce the same on the UNIX shell with:

$ printf "\n%-10s Fim\n%-10s Fim\n" "Variável" "Variavel"

Variável Fim
Variavel Fim

Hmm. Zsh gets it right:

trintignant:~ 0:31 :-) 1032% printf "\n%-10s Fim\n%-10s Fim\n" "Variável" "Variavel"

Variável Fim
Variavel Fim

As do Perl and Python.

The second test (changing the accented char 'á' by 'X'), shows that the
problem/bug is a) more generic, not only in PostgreSQL and b) has todo
with being the UTF-8 char 'á' a two byte char, while 'X' is only one
byte.

Yes, determining how much space a UTF-8 sequence occupies on screen is
surprisingly hard. I'm not sure what the C standard says about that. But
these days I would expect any programming language to get it right at
least for the simple cases.

hp

--
_ | Peter J. Holzer | Story must make more sense than reality.
|_|_) | |
| | | hjp@hjp.at | -- Charles Stross, "Creative writing
__/ | http://www.hjp.at/ | challenge!"

"Peter J. Holzer" <hjp-pgsql@hjp.at> writes:

On 2020-10-17 20:51:36 +0200, Matthias Apitz wrote:

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso Lorenzetti escribió:

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Which programming language is this? PL/pgSQL?

Looks like C in the backend.

The second test (changing the accented char 'á' by 'X'), shows that the
problem/bug is a) more generic, not only in PostgreSQL and b) has todo
with being the UTF-8 char 'á' a two byte char, while 'X' is only one
byte.

Yes, determining how much space a UTF-8 sequence occupies on screen is
surprisingly hard. I'm not sure what the C standard says about that. But
these days I would expect any programming language to get it right at
least for the simple cases.

Our version of snprintf intentionally counts bytes not characters,
so that it does not have to make assumptions about what encoding
the given string uses. It's somewhat unclear whether the C/POSIX
standard mandates either of these interpretations. The GNU
implementation of snprintf tries to count characters. But in the
cases where that's mattered to us at all, it's generally been the
wrong thing, because glibc didn't necessarily know the encoding to
use. That's one reason why we stopped relying on libc's snprintf.

The way to get this to work as Celso wishes would be to count
characters and then do his own arithmetic about how much padding
to add.

regards, tom lane

Hi Peter,

is language C standart..

On 2020-10-17 20:51:36 +0200, Matthias Apitz wrote:

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso

Lorenzetti escribió:

Somebody help me, please.

How to make the texts are aligned with 10 characters?

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Which programming language is this? PL/pgSQL?

Hola Celso,

You can reproduce the same on the UNIX shell with:

$ printf "\n%-10s Fim\n%-10s Fim\n" "Variável" "Variavel"

Variável Fim
Variavel Fim

Hmm. Zsh gets it right:

trintignant:~ 0:31 :-) 1032% printf "\n%-10s Fim\n%-10s Fim\n" "Variável"
"Variavel"

Variável Fim
Variavel Fim

As do Perl and Python.

The second test (changing the accented char 'á' by 'X'), shows that
the problem/bug is a) more generic, not only in PostgreSQL and b) has
todo with being the UTF-8 char 'á' a two byte char, while 'X' is only
one byte.

Yes, determining how much space a UTF-8 sequence occupies on screen is
surprisingly hard. I'm not sure what the C standard says about that. But
these days I would expect any programming language to get it right at least
for the simple cases.

hp

--
_ | Peter J. Holzer | Story must make more sense than reality.
|_|_) | |
| | | hjp@hjp.at | -- Charles Stross, "Creative writing
__/ | http://www.hjp.at/ | challenge!"

--
Este email foi escaneado pelo Avast antivírus.
https://www.avast.com/antivirus

Thanks Tom Lane, got it, I will follow the suggestion

Att,

-----Mensagem original-----
De: Tom Lane [mailto:tgl@sss.pgh.pa.us]
Enviada em: sábado, 17 de outubro de 2020 20:08
Para: Peter J. Holzer
Cc: pgsql-general@lists.postgresql.org
Assunto: Re: print formated special characteres

"Peter J. Holzer" <hjp-pgsql@hjp.at> writes:

On 2020-10-17 20:51:36 +0200, Matthias Apitz wrote:

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso Lorenzetti escribió:

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Which programming language is this? PL/pgSQL?

Looks like C in the backend.

The second test (changing the accented char 'á' by 'X'), shows that the
problem/bug is a) more generic, not only in PostgreSQL and b) has todo
with being the UTF-8 char 'á' a two byte char, while 'X' is only one
byte.

Yes, determining how much space a UTF-8 sequence occupies on screen is
surprisingly hard. I'm not sure what the C standard says about that. But
these days I would expect any programming language to get it right at
least for the simple cases.

Our version of snprintf intentionally counts bytes not characters,
so that it does not have to make assumptions about what encoding
the given string uses. It's somewhat unclear whether the C/POSIX
standard mandates either of these interpretations. The GNU
implementation of snprintf tries to count characters. But in the
cases where that's mattered to us at all, it's generally been the
wrong thing, because glibc didn't necessarily know the encoding to
use. That's one reason why we stopped relying on libc's snprintf.

The way to get this to work as Celso wishes would be to count
characters and then do his own arithmetic about how much padding
to add.

regards, tom lane

--
Este email foi escaneado pelo Avast antivírus.
https://www.avast.com/antivirus

po 19. 10. 2020 v 3:18 odesílatel Celso Lorenzetti <celso@sysrs.com.br>
napsal:

Hi Peter,

is language C standart..

On 2020-10-17 20:51:36 +0200, Matthias Apitz wrote:

El día sábado, octubre 17, 2020 a las 03:37:46p. m. -0300, Celso

Lorenzetti escribió:

Somebody help me, please.

How to make the texts are aligned with 10 characters?

elog(INFO, "\n%-10s Fim\n%-10s Fim\n", "Variável", "Variavel");

Which programming language is this? PL/pgSQL?

This is an internal function available in internal C API.

As Tom Lane said in other mail - this internal API just doesn't support
alignment for multibyte encodings.

Regards

Pavel