Huge archive log generate in Postgresql-13

On 4/18/22 07:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 .  after upgrade
to 13  huge archive log generate in system .

Before upgrade  per day 120GB to 150 GB log generated but after
upgrade per day approx. 250 to 300 GB log generated.

Can you please suggest why huge archive log generated after upgrade
 there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

Have you checked what's in those WAL archives? You can do that with
pg_waldump. My guess would be that your vacuum is probably more active
than in the version 11. However, that's just a guess. You can also turn
on WAL compression. Be aware that compression will reduce disk
consumption at the expense of CPU consumption.

Regards

--
Mladen Gogala
Database Consultant
Tel: (347) 321-1217
https://dbwhisperer.wordpress.com

Hi Support,

We have upgraded postgresql DB from version 11 to 13 . after upgrade to 13 huge archive log generate in system .
Before upgrade per day 120GB to 150 GB log generated but after upgrade per day approx. 250 to 300 GB log generated.
Can you please suggest why huge archive log generated after upgrade there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,
Ram Pratap.

wal_level = hot_standby            # minimal, replica, or logical
                    # (change requires restart)

Set wal_level to one of the allowed values. It's possible that your
value gets interpreted as logical, thus creating larger wal entries.

Am 18.04.22 um 13:47 schrieb Ram Pratap Maurya:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 .  after upgrade
to 13  huge archive log generate in system .

Before upgrade  per day 120GB to 150 GB log generated but after
upgrade per day approx. 250 to 300 GB log generated.

Can you please suggest why huge archive log generated after upgrade
 there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--
Holger Jakobs, Bergisch Gladbach, Tel. +49-178-9759012

On 4/18/22 04:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 .  after upgrade to
13  huge archive log generate in system .

Before upgrade  per day 120GB to 150 GB log generated but after upgrade
per day approx. 250 to 300 GB log generated.

Where are you measuring this in the WAL directory or the archive directory?

Do you have replication set up from this server and if so what type?

FYI, the wal_level setting of hot_standby is deprecated and maps to
replica since version 9.6. At some point you might want to change to
match current documentation.

Can you please suggest why huge archive log generated after upgrade
 there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--
Adrian Klaver
adrian.klaver@aklaver.com

Grenting,
Is your logging set to high verbosity??

Usually use high verbosity for debugging, then change to low verbosity.

Clive

________________________________
From: Holger Jakobs <holger@jakobs.com>
Sent: Monday, 18 April 2022, 13:10
To: pgsql-admin@lists.postgresql.org <pgsql-admin@lists.postgresql.org>
Subject: Re: Huge archive log generate in Postgresql-13

wal_level = hot_standby # minimal, replica, or logical
# (change requires restart)

Set wal_level to one of the allowed values. It's possible that your value gets interpreted as logical, thus creating larger wal entries.

Am 18.04.22 um 13:47 schrieb Ram Pratap Maurya:
Hi Support,

We have upgraded postgresql DB from version 11 to 13 . after upgrade to 13 huge archive log generate in system .
Before upgrade per day 120GB to 150 GB log generated but after upgrade per day approx. 250 to 300 GB log generated.
Can you please suggest why huge archive log generated after upgrade there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,
Ram Pratap.

--
Holger Jakobs, Bergisch Gladbach, Tel. +49-178-9759012

Dear Adrian,

We have two replica system one is Slave and other id DR server .
Salve server replicate from PG_WAL and DR system replicate from pg_log_archive.

Can you please suggest what changes need to required in PG13 conf file.

Regards,
Ram Pratap.

-----Original Message-----
From: Adrian Klaver [mailto:adrian.klaver@aklaver.com]
Sent: 18 April 2022 21:30
To: Ram Pratap Maurya <ram.maurya@lavainternational.in>; pgsql-general@postgresql.org
Cc: Manu Saxena <manu.saxena@lavainternational.in>
Subject: Re: Huge archive log generate in Postgresql-13

On 4/18/22 04:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 .  after upgrade
to
13  huge archive log generate in system .

Before upgrade  per day 120GB to 150 GB log generated but after
upgrade per day approx. 250 to 300 GB log generated.

Where are you measuring this in the WAL directory or the archive directory?

Do you have replication set up from this server and if so what type?

FYI, the wal_level setting of hot_standby is deprecated and maps to replica since version 9.6. At some point you might want to change to match current documentation.

Can you please suggest why huge archive log generated after upgrade
 there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--
Adrian Klaver
adrian.klaver@aklaver.com

Dear Adrian,

If we set parameter "PG-WAL = replica" in PG13 conf file , there is any issue in replication through PG_WAL and pg_log_archive log.

https://www.postgresql.org/docs/13/runtime-config-wal.html

Regards,

Ram Pratap.

-----Original Message-----
From: Ram Pratap Maurya
Sent: 19 April 2022 09:00
To: Adrian Klaver <adrian.klaver@aklaver.com>; pgsql-general@postgresql.org
Cc: Manu Saxena <manu.saxena@lavainternational.in>
Subject: RE: Huge archive log generate in Postgresql-13

Dear Adrian,

We have two replica system one is Slave and other id DR server .

Salve server replicate from PG_WAL and DR system replicate from pg_log_archive.

Can you please suggest what changes need to required in PG13 conf file.

Regards,

Ram Pratap.

-----Original Message-----

From: Adrian Klaver [mailto:adrian.klaver@aklaver.com]

Sent: 18 April 2022 21:30

To: Ram Pratap Maurya <ram.maurya@lavainternational.in<mailto:ram.maurya@lavainternational.in>>; pgsql-general@postgresql.org<mailto:pgsql-general@postgresql.org>

Cc: Manu Saxena <manu.saxena@lavainternational.in<mailto:manu.saxena@lavainternational.in>>

Subject: Re: Huge archive log generate in Postgresql-13

On 4/18/22 04:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 . after upgrade

to

13 huge archive log generate in system .

Before upgrade per day 120GB to 150 GB log generated but after

upgrade per day approx. 250 to 300 GB log generated.

Where are you measuring this in the WAL directory or the archive directory?

Do you have replication set up from this server and if so what type?

FYI, the wal_level setting of hot_standby is deprecated and maps to replica since version 9.6. At some point you might want to change to match current documentation.

Can you please suggest why huge archive log generated after upgrade

there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--

Adrian Klaver

adrian.klaver@aklaver.com<mailto:adrian.klaver@aklaver.com>

On 4/18/22 21:41, Ram Pratap Maurya wrote:

Dear Adrian,

If we set  parameter *"PG-WAL  = replica"*  in PG13 conf file , there is
any issue  in replication through PG_WAL  and pg_log_archive log.

In versions of Postgres from 9.6+ your setting of hot_standby is mapped
to the replica setting so it is really not a change. In other words the
hot_standby setting = replica setting as of 9.6. I made the suggestion
to change just so the conf setting matches the choices in current
documentation. Less confusion for someone looking through the
postgresql.conf file and then looking up the values in the documentation.

As to your replication is that binary replication or logical replication?

Also you have not said where you are measuring the size growth in WAL files?

Regards,

Ram Pratap.

-----Original Message-----
From: Ram Pratap Maurya
Sent: 19 April 2022 09:00
To: Adrian Klaver <adrian.klaver@aklaver.com>; pgsql-general@postgresql.org
Cc: Manu Saxena <manu.saxena@lavainternational.in>
Subject: RE: Huge archive log generate in Postgresql-13

Dear Adrian,

We have two replica system one is Slave and other id DR server .

Salve server replicate from PG_WAL and DR system replicate from
pg_log_archive.

Can you please suggest what changes need to required in PG13 conf file.

Regards,

Ram Pratap.

-----Original Message-----

From: Adrian Klaver [mailto:adrian.klaver@aklaver.com
<mailto:adrian.klaver@aklaver.com>]

Sent: 18 April 2022 21:30

To: Ram Pratap Maurya <ram.maurya@lavainternational.in
<mailto:ram.maurya@lavainternational.in>>; pgsql-general@postgresql.org
<mailto:pgsql-general@postgresql.org>

Cc: Manu Saxena <manu.saxena@lavainternational.in
<mailto:manu.saxena@lavainternational.in>>

Subject: Re: Huge archive log generate in Postgresql-13

On 4/18/22 04:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 .  after upgrade

to

13  huge archive log generate in system .

Before upgrade  per day 120GB to 150 GB log generated but after

upgrade per day approx. 250 to 300 GB log generated.

Where are you measuring this in the WAL directory or the archive directory?

Do you have replication set up from this server and if so what type?

FYI, the wal_level setting of hot_standby is deprecated and maps to
replica since version 9.6. At some point you might want to change to
match current documentation.

Can you please suggest why huge archive log generated after upgrade

  there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--

Adrian Klaver

adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>

--
Adrian Klaver
adrian.klaver@aklaver.com

Dear Adrian,

We are using binary replication and par day pg_log_archive total size is increase after upgrade for PG11 to PG13.

Regards,

Ram Pratap.

-----Original Message-----
From: Adrian Klaver [mailto:adrian.klaver@aklaver.com]
Sent: 19 April 2022 22:51
To: Ram Pratap Maurya <ram.maurya@lavainternational.in>; pgsql-general@postgresql.org
Subject: Re: Huge archive log generate in Postgresql-13

On 4/18/22 21:41, Ram Pratap Maurya wrote:

Dear Adrian,

If we set parameter *"PG-WAL = replica"* in PG13 conf file , there

is any issue in replication through PG_WAL and pg_log_archive log.

In versions of Postgres from 9.6+ your setting of hot_standby is mapped to the replica setting so it is really not a change. In other words the hot_standby setting = replica setting as of 9.6. I made the suggestion to change just so the conf setting matches the choices in current documentation. Less confusion for someone looking through the postgresql.conf file and then looking up the values in the documentation.

As to your replication is that binary replication or logical replication?

Also you have not said where you are measuring the size growth in WAL files?

Regards,

Ram Pratap.

-----Original Message-----

From: Ram Pratap Maurya

Sent: 19 April 2022 09:00

To: Adrian Klaver <adrian.klaver@aklaver.com<mailto:adrian.klaver@aklaver.com>>;

pgsql-general@postgresql.org<mailto:pgsql-general@postgresql.org>

Cc: Manu Saxena <manu.saxena@lavainternational.in<mailto:manu.saxena@lavainternational.in>>

Subject: RE: Huge archive log generate in Postgresql-13

Dear Adrian,

We have two replica system one is Slave and other id DR server .

Salve server replicate from PG_WAL and DR system replicate from

pg_log_archive.

Can you please suggest what changes need to required in PG13 conf file.

Regards,

Ram Pratap.

-----Original Message-----

From: Adrian Klaver [mailto:adrian.klaver@aklaver.com

<mailto:adrian.klaver@aklaver.com>]

Sent: 18 April 2022 21:30

To: Ram Pratap Maurya <ram.maurya@lavainternational.in

<mailto:ram.maurya@lavainternational.in>>;

pgsql-general@postgresql.org<mailto:pgsql-general@postgresql.org> <mailto:pgsql-general@postgresql.org>

Cc: Manu Saxena <manu.saxena@lavainternational.in

<mailto:manu.saxena@lavainternational.in>>

Subject: Re: Huge archive log generate in Postgresql-13

On 4/18/22 04:34, Ram Pratap Maurya wrote:

Hi Support,

We have upgraded postgresql DB from version 11 to 13 . after

upgrade

to

13 huge archive log generate in system .

Before upgrade per day 120GB to 150 GB log generated but after

upgrade per day approx. 250 to 300 GB log generated.

Where are you measuring this in the WAL directory or the archive directory?

Do you have replication set up from this server and if so what type?

FYI, the wal_level setting of hot_standby is deprecated and maps to

replica since version 9.6. At some point you might want to change to

match current documentation.

Can you please suggest why huge archive log generated after upgrade

there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,

Ram Pratap.

--

Adrian Klaver

adrian.klaver@aklaver.com<mailto:adrian.klaver@aklaver.com> <mailto:adrian.klaver@aklaver.com>

--

Adrian Klaver

adrian.klaver@aklaver.com<mailto:adrian.klaver@aklaver.com>

Dear Holger,

we have one slave server and one DR server.
salve server working on streaming replication and DR server replicate with Archive log.
if we change "wal_level " parameter value to “replica” there any impact in existing server (Salve and DR) replication?
Please suggest .

Regards,
Ram Pratap.

From: Ram Pratap Maurya
Sent: 21 April 2022 09:49
To: Ram Pratap Maurya <ram.maurya@lavainternational.in>
Subject: FW: Huge archive log generate in Postgresql-13

---------- Forwarded message ---------
From: Clive Swan <cliveswan@gmail.com<mailto:cliveswan@gmail.com>>
Date: Tue, Apr 19, 2022 at 12:45 AM
Subject: Re: Huge archive log generate in Postgresql-13
To: Holger Jakobs <holger@jakobs.com<mailto:holger@jakobs.com>>, pgsql-admin@lists.postgresql.org<mailto:pgsql-admin@lists.postgresql.org> <pgsql-admin@lists.postgresql.org<mailto:pgsql-admin@lists.postgresql.org>>

Grenting,
Is your logging set to high verbosity??

Usually use high verbosity for debugging, then change to low verbosity.

Clive

________________________________
From: Holger Jakobs <holger@jakobs.com<mailto:holger@jakobs.com>>
Sent: Monday, 18 April 2022, 13:10
To: pgsql-admin@lists.postgresql.org<mailto:pgsql-admin@lists.postgresql.org> <pgsql-admin@lists.postgresql.org<mailto:pgsql-admin@lists.postgresql.org>>
Subject: Re: Huge archive log generate in Postgresql-13

wal_level = hot_standby # minimal, replica, or logical
# (change requires restart)

Set wal_level to one of the allowed values. It's possible that your value gets interpreted as logical, thus creating larger wal entries.
Am 18.04.22 um 13:47 schrieb Ram Pratap Maurya:
Hi Support,

We have upgraded postgresql DB from version 11 to 13 . after upgrade to 13 huge archive log generate in system .
Before upgrade per day 120GB to 150 GB log generated but after upgrade per day approx. 250 to 300 GB log generated.
Can you please suggest why huge archive log generated after upgrade there any configure setting or this is Postgresql-13 behaviour.

Postgresql-13 Postgresql conf file attached for your references.

Regards,
Ram Pratap.

--

Holger Jakobs, Bergisch Gladbach, Tel. +49-178-9759012

On 4/19/22 21:31, Ram Pratap Maurya wrote:

Dear Adrian,

We are using binary replication and par day *pg_log_archive* total size
is increase after upgrade for PG11 to PG13.

So what is pruning the WAL's in pg_log_archive?

Or to put it another way what is the purpose of pg_log_archive and how
is it managed?

Regards,

Ram Pratap.

--
Adrian Klaver
adrian.klaver@aklaver.com

Dear Adrian,

We are using "pg_log_archive" for Point-in-Time Recovery and DR replication.

Regards,
Ram Pratap.

-----Original Message-----
From: Adrian Klaver [mailto:adrian.klaver@aklaver.com]
Sent: 21 April 2022 21:35
To: Ram Pratap Maurya <ram.maurya@lavainternational.in>; pgsql-general@postgresql.org
Subject: Re: Huge archive log generate in Postgresql-13

On 4/19/22 21:31, Ram Pratap Maurya wrote:

Dear Adrian,

We are using binary replication and par day *pg_log_archive* total
size is increase after upgrade for PG11 to PG13.

So what is pruning the WAL's in pg_log_archive?

Or to put it another way what is the purpose of pg_log_archive and how is it managed?

Regards,

Ram Pratap.

--
Adrian Klaver
adrian.klaver@aklaver.com

Hi Team,

I am facing error during restore of PG_BASEBACKUP , server is not going UP after restoring .
We follow below process .

1. First we take backup by command : pg_basebackup -h127.0.01 -U postgres -D /mnt/backup
2. Maintain restore_command = 'cp /var/lib/pgsql/13/data/pg_log_archive/%f %p' in postgresql.conf file .
3. Create file recovery.signal file in data directory.

But when we starting server showing error below error , can you please suggest .

[root@NHQ-MYLAVA-DB01 data]# systemctl status postgresql-13
● postgresql-13.service - PostgreSQL 13 database server
Loaded: loaded (/usr/lib/systemd/system/postgresql-13.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Fri 2023-07-21 09:00:15 IST; 17s ago
Docs: https://www.postgresql.org/docs/13/static/
Process: 8407 ExecStart=/usr/pgsql-13/bin/postmaster -D ${PGDATA} (code=exited, status=1/FAILURE)
Process: 8401 ExecStartPre=/usr/pgsql-13/bin/postgresql-13-check-db-dir ${PGDATA} (code=exited, status=0/SUCCESS)
Main PID: 8407 (code=exited, status=1/FAILURE)

Jul 21 09:00:15 NHQ-MYLAVA-DB01 systemd[1]: Starting PostgreSQL 13 database server...
Jul 21 09:00:15 NHQ-MYLAVA-DB01 systemd[1]: postgresql-13.service: Main process exited, code=exited, status=1/FAILURE
Jul 21 09:00:15 NHQ-MYLAVA-DB01 systemd[1]: postgresql-13.service: Failed with result 'exit-code'.
Jul 21 09:00:15 NHQ-MYLAVA-DB01 systemd[1]: Failed to start PostgreSQL 13 database server.

Regards,
Ram Pratap.

Dear Team,

We have upgraded PostgreSQL DB from version 13 to 15 version .
We are facing issue in PG15 we not enable any parameter related to AUTOVACUUM , but still running on PG15 data base.

Below process showing :

2313192 | 02:10:01.283176 | | myLava | active | autovacuum: VACUUM ANALYZE public.tstock_movement (to prevent wraparound)

And one more issue we are facing after upgrade lot of alert is coming in DB log file , please suggest this is bug in Postgresql-15 version.

2024-08-26 00:00:36.783 IST [702937] WARNING: oldest xmin is far in the past
2024-08-26 00:00:36.783 IST [702937] HINT: Close open transactions soon to avoid wraparound problems.
You might also need to commit or roll back old prepared transactions, or drop stale replication slots.
2024-08-26 00:00:36.784 IST [702937] WARNING: oldest xmin is far in the past
2024-08-26 00:00:36.784 IST [702937] HINT: Close open transactions soon to avoid wraparound problems.
You might also need to commit or roll back old prepared transactions, or drop stale replication slots.

DB OS -RHEL8.

Regards,
Ram Pratap.

Hi

On Tue, Aug 27, 2024 at 1:50 PM Ram Pratap Maurya <
ram.maurya@lavainternational.in> wrote:

Dear Team,

We have upgraded PostgreSQL DB from version 13 to 15 version .

We are facing issue in PG15 we not enable any parameter related to
AUTOVACUUM , but still running on PG15 data base.

Below process showing :

*2313192 | 02:10:01.283176 | | myLava | active |
autovacuum: VACUUM ANALYZE public.tstock_movement (to prevent wraparound)*

And one more issue we are facing after upgrade lot of alert is coming in
DB log file , please suggest this is bug in Postgresql-15 version.

*2024-08-26 00:00:36.783 IST [702937] WARNING: oldest xmin is far in the
past*

*2024-08-26 00:00:36.783 IST [702937] HINT: Close open transactions soon
to avoid wraparound problems.*

* You might also need to commit or roll back old prepared
transactions, or drop stale replication slots.*

*2024-08-26 00:00:36.784 IST [702937] WARNING: oldest xmin is far in the
past*

*2024-08-26 00:00:36.784 IST [702937] HINT: Close open transactions soon
to avoid wraparound problems.*

* You might also need to commit or roll back old prepared
transactions, or drop stale replication slots.*

These are warnings not error, can you please share the error you are
getting.

Thanks
Kashif Zeeshan

Show quoted text

*DB OS -RHEL8.*

Regards,

Ram Pratap.

On 8/27/24 01:50, Ram Pratap Maurya wrote:

Dear Team,

We have upgraded PostgreSQL DB from version 13 to 15 version .

We are facing issue in PG15 we not enable any parameter related to
AUTOVACUUM , but still running on PG15 data base.

You need to provide more detail about the above.

What parameters are you trying to change?

Do you get an error?

Did you reload/restart the server after the changes?

What user did you do the changes as?

*2024-08-26 00:00:36.783 IST [702937] WARNING:  oldest xmin is far in
the past*

*2024-08-26 00:00:36.783 IST [702937] HINT:  Close open transactions
soon to avoid wraparound problems.*

*        You might also need to commit or roll back old prepared
transactions, or drop stale replication slots.*

I would say the above is pointing you at possible solutions.

To understand why this is important:

https://www.postgresql.org/docs/16/routine-vacuuming.html

Read the following sections:

25.1.5. Preventing Transaction ID Wraparound Failures

25.1.6. The Autovacuum Daemon

Regards,

Ram Pratap.

--
Adrian Klaver
adrian.klaver@aklaver.com