problems with building recent cvs snaphots
hi
when i'm trying to build recent cvs snaphots (taken 30 minuts ago for
example, but i had the same problem with eariel snapshots as well), i
get this (after configure, during make:
$ make maintainer-clean && ./depesz.configure.sh && make
...
...
gcc -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -fpic -shared
-Wl,-soname,libecpg.so.3 execute.o typename.o descriptor.o data.o
error.o prepare.o memory.o connect.o misc.o
-L../../../../src/interfaces/libpq -lpq
-Wl,-rpath,/home/users/pgdba/work/lib -o libecpg.so.3.4.0
rm -f libecpg.so.3
ln -s libecpg.so.3.4.0 libecpg.so.3
rm -f libecpg.so
ln -s libecpg.so.3.4.0 libecpg.so
make[4]: Leaving directory
`/home/users/pgdba/cvs/pgsql/src/interfaces/ecpg/lib'
make -C preproc all
make[4]: Entering directory
`/home/users/pgdba/cvs/pgsql/src/interfaces/ecpg/preproc'
make -C ../../../../src/port all
make[5]: Entering directory `/home/users/pgdba/cvs/pgsql/src/port'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/users/pgdba/cvs/pgsql/src/port'
bison -y -d preproc.y
preproc.y:5560: fatal error: maximum table size (32767) exceeded
make[4]: *** [preproc.h] Error 1
make[4]: Leaving directory
`/home/users/pgdba/cvs/pgsql/src/interfaces/ecpg/preproc'
make[3]: *** [all] Error 2
make[3]: Leaving directory
`/home/users/pgdba/cvs/pgsql/src/interfaces/ecpg'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/users/pgdba/cvs/pgsql/src/interfaces'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/users/pgdba/cvs/pgsql/src'
make: *** [all] Error 2
$
depesz.configure.sh is my configure script which calls ./configure with
appropiate parameters:
$ cat depesz.configure.sh
#!/bin/bash
./configure \
--prefix=/home/users/pgdba/work \
--with-tcl \
--with-tk \
--with-perl \
--with-python \
--without-java \
--without-krb4 \
--without-krb5 \
--without-pam \
--without-openssl \
--with-readline \
--with-zlib \
--with-gnu-ld
versions of my software:
$ rpm -q gcc glibc readline perl python bison flex cpp autoconf automake
libtool zlib | sort
autoconf-2.53a-1
automake-1.6.3-1
bison-1.35-5
cpp-2.95.4-0.20010823.3
flex-2.5.4a-27
gcc-2.95.4-0.20010823.3
glibc-2.2.5-21
libtool-1.4.2-12
perl-5.6.1-63
python-2.2.1-19
readline-4.3-5
zlib-1.1.4-5
what should i do?
depesz
--
hubert depesz lubaczewski http://www.depesz.pl/
------------------------------------------------------------------------
M�j Bo�e, spraw abym milcza�, dop�ki si� nie upewni�, �e naprawd� mam
coďż˝ do powiedzenia. (c) 1998 depesz
Hubert depesz Lubaczewski <depesz@depesz.pl> writes:
hi
when i'm trying to build recent cvs snaphots (taken 30 minuts ago for
example, but i had the same problem with eariel snapshots as well), i
get this (after configure, during make:
Upgrade your Bison to 1.50 or later (1.75 is current).
-Doug
Import Notes
Reply to msg id not found: HubertdepeszLubaczewski'smessageofSat2Nov2002004213+0100
Hubert depesz Lubaczewski <depesz@depesz.pl> writes:
bison -y -d preproc.y
preproc.y:5560: fatal error: maximum table size (32767) exceeded
what should i do?
Update to bison 1.50 or later (1.75 is current last I checked).
Or use a tarball distribution (beta3 or the nightly snapshot).
regards, tom lane
On Fri, Nov 01, 2002 at 07:23:40PM -0500, Doug McNaught wrote:
Upgrade your Bison to 1.50 or later (1.75 is current).
unfortunatelly the linux distribution i use doesn't provide it. as far
as i know it's because bison > 1.35 is not compatibile with gcc 3.2.
can i do anything with bison 1.35?
depesz
--
hubert depesz lubaczewski http://www.depesz.pl/
------------------------------------------------------------------------
Mój Boże, spraw abym milczał, dopóki się nie upewnię, że naprawdę mam
coś do powiedzenia. (c) 1998 depesz
On Fri, Nov 01, 2002 at 07:28:16PM -0500, Tom Lane wrote:
Update to bison 1.50 or later (1.75 is current last I checked).
i can't update - it's not supported by my distribution.
Or use a tarball distribution (beta3 or the nightly snapshot).
and precompiled binaries are not really an option.
depesz
--
hubert depesz lubaczewski http://www.depesz.pl/
------------------------------------------------------------------------
Mój Boże, spraw abym milczał, dopóki się nie upewnię, że naprawdę mam
coś do powiedzenia. (c) 1998 depesz
Hubert depesz Lubaczewski <depesz@depesz.pl> writes:
On Fri, Nov 01, 2002 at 07:28:16PM -0500, Tom Lane wrote:
Update to bison 1.50 or later (1.75 is current last I checked).
i can't update - it's not supported by my distribution.
Or use a tarball distribution (beta3 or the nightly snapshot).
and precompiled binaries are not really an option.
Tom means a tarball source distribution. You don't have to run Bison
when building from a tarball (the Bison-generated files are already
included); you do when building from CVS. Clear?
-Doug
Import Notes
Reply to msg id not found: HubertdepeszLubaczewski'smessageofSat2Nov2002105608+0100
On Sat, Nov 02, 2002 at 09:13:23AM -0500, Doug McNaught wrote:
Tom means a tarball source distribution. You don't have to run Bison
when building from a tarball (the Bison-generated files are already
included); you do when building from CVS. Clear?
aaa. sorry. i misunderstood. i'll look at this.
depesz
--
hubert depesz lubaczewski http://www.depesz.pl/
------------------------------------------------------------------------
M�j Bo�e, spraw abym milcza�, dop�ki si� nie upewni�, �e naprawd� mam
coďż˝ do powiedzenia. (c) 1998 depesz
Doug McNaught <doug@mcnaught.org> writes:
Hubert depesz Lubaczewski <depesz@depesz.pl> writes:
On Fri, Nov 01, 2002 at 07:28:16PM -0500, Tom Lane wrote:
Or use a tarball distribution (beta3 or the nightly snapshot).
and precompiled binaries are not really an option.
Tom means a tarball source distribution. You don't have to run Bison
when building from a tarball (the Bison-generated files are already
included); you do when building from CVS. Clear?
Also, if you're willing to build Postgres from source, I fail to see why
you're resisting building bison from source. It's not hard:
tar xfz bison-1.75.tar.gz
cd bison-1.75
make
make check -- optional
make install -- probably need to do this step as root
and then make sure /usr/local/bin is in your PATH ahead of whereever
the standard bison lives. When your distro updates, clean out
/usr/local and you're back to normal.
regards, tom lane
Hubert depesz Lubaczewski <depesz@depesz.pl> writes:
unfortunatelly the linux distribution i use doesn't provide it. as far
as i know it's because bison > 1.35 is not compatibile with gcc 3.2.
Nonsense. I installed bison 1.75 just yesterday on a fresh RH 8.0
installation (which is gcc 3.2). Works fine.
regards, tom lane