Fw: configure error with krb5

Uh, you can look in config.log and see how it is looking for that
function. You can then modify configure to test a different way or
figure out a way so configure finds what it needs.

If you send over the part of config.log dealing with that test, it may
help.

---------------------------------------------------------------------------

kanchana wrote:

Hello all,

Since there is no reply, i'm forwarding it again.
hope someone will help me to overcome this.

advance thanks,
-kanchana

Hello all,

I'm using postgresql-latest version. I'm not able to configure with
kerberos5(latest).
While configuring postgresql, i got the following error.

$./configure --with-openssl --with-krb5=/usr/local/krb5
:
:
checking for inflate in -lz... yes
checking for library containing com_err... -lcom_err
checking for library containing krb5_encrypt... -lk5crypto
checking for library containing krb5_sendauth... no
configure: error: could not find function 'krb5_sendauth' required for
Kerberos 5

how to avoid this.? plz help me asap.

OS: HP-UX 11i

Advance thanks,
-Kanchana

---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly

-- 
  Bruce Momjian                        |  http://candle.pha.pa.us
  pgman@candle.pha.pa.us               |  (610) 359-1001
  +  If your life is a hard drive,     |  13 Roberts Road
  +  Christ can be your backup.        |  Newtown Square, Pennsylvania 19073

Hello Bruce Momjian,

Thanks for your response. I planned to compile without any options like ssl
and krb5.

just
./configure --prefix=/opt/postgres --with-libraries=/usr/local/lib --with-in
cludes=/usr/local/include/readli
ne
gmake and gmake install

It compiles and installed.

But while doing basic testing , it gives following error ........
i thinkproblem is in readline. (i have tried with hp-ux readline (from depot
too), same probelm.

i.e...
while testing:-

$ /opt/postgres/bin/psql test2
Welcome to psql 7.3.1, the PostgreSQL interactive terminal.

Type: \copyright for distribution terms
\h for help with SQL commands
\? for help on internal slash commands
\g or terminate with semicolon to execute query
\q to quit

/usr/lib/dld.sl: Unresolved symbol: tgetent (code) from
/usr/local/lib/libreadline.sl
Abort(coredump)

Test logfile:-

LOG: database system was shut down at 2003-01-17 05:58:00 PST
LOG: checkpoint record is at 0/83B1A8
LOG: redo record is at 0/83B1A8; undo record is at 0/0; shutdown TRUE
LOG: next transaction id: 480; next oid: 16976
LOG: database system is ready

LOG: pq_recvbuf: unexpected EOF on client connection

Plz tell me how to overcome this.? I'm using HP-UX11.11
Once its ok, then i can try with krb5.

Advance thanks and regards,
-Kanchana

Uh, you can look in config.log and see how it is looking for that
function. You can then modify configure to test a different way or
figure out a way so configure finds what it needs.

If you send over the part of config.log dealing with that test, it may
help.

--------------------------------------------------------------------------

-

kanchana wrote:

Hello all,

Since there is no reply, i'm forwarding it again.
hope someone will help me to overcome this.

advance thanks,
-kanchana

Hello all,

I'm using postgresql-latest version. I'm not able to configure

with

kerberos5(latest).
While configuring postgresql, i got the following error.

$./configure --with-openssl --with-krb5=/usr/local/krb5
:
:
checking for inflate in -lz... yes
checking for library containing com_err... -lcom_err
checking for library containing krb5_encrypt... -lk5crypto
checking for library containing krb5_sendauth... no
configure: error: could not find function 'krb5_sendauth' required for
Kerberos 5

how to avoid this.? plz help me asap.

OS: HP-UX 11i

Advance thanks,
-Kanchana

---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly

--
Bruce Momjian                        |  http://candle.pha.pa.us
pgman@candle.pha.pa.us               |  (610) 359-1001
+  If your life is a hard drive,     |  13 Roberts Road
+  Christ can be your backup.        |  Newtown Square, Pennsylvania

19073

For tget, you need -ltermcap or -lcurses on the link line of psql.

---------------------------------------------------------------------------

kanchana wrote:

Hello Bruce Momjian,

Thanks for your response. I planned to compile without any options like ssl
and krb5.

just
./configure --prefix=/opt/postgres --with-libraries=/usr/local/lib --with-in
cludes=/usr/local/include/readli
ne
gmake and gmake install

It compiles and installed.

But while doing basic testing , it gives following error ........
i thinkproblem is in readline. (i have tried with hp-ux readline (from depot
too), same probelm.

i.e...
while testing:-

$ /opt/postgres/bin/psql test2
Welcome to psql 7.3.1, the PostgreSQL interactive terminal.

Type: \copyright for distribution terms
\h for help with SQL commands
\? for help on internal slash commands
\g or terminate with semicolon to execute query
\q to quit

/usr/lib/dld.sl: Unresolved symbol: tgetent (code) from
/usr/local/lib/libreadline.sl
Abort(coredump)

Test logfile:-

LOG: database system was shut down at 2003-01-17 05:58:00 PST
LOG: checkpoint record is at 0/83B1A8
LOG: redo record is at 0/83B1A8; undo record is at 0/0; shutdown TRUE
LOG: next transaction id: 480; next oid: 16976
LOG: database system is ready

LOG: pq_recvbuf: unexpected EOF on client connection

Plz tell me how to overcome this.? I'm using HP-UX11.11
Once its ok, then i can try with krb5.

Advance thanks and regards,
-Kanchana

Uh, you can look in config.log and see how it is looking for that
function. You can then modify configure to test a different way or
figure out a way so configure finds what it needs.

If you send over the part of config.log dealing with that test, it may
help.

--------------------------------------------------------------------------

-

kanchana wrote:

Hello all,

Since there is no reply, i'm forwarding it again.
hope someone will help me to overcome this.

advance thanks,
-kanchana

Hello all,

I'm using postgresql-latest version. I'm not able to configure

with

kerberos5(latest).
While configuring postgresql, i got the following error.

$./configure --with-openssl --with-krb5=/usr/local/krb5
:
:
checking for inflate in -lz... yes
checking for library containing com_err... -lcom_err
checking for library containing krb5_encrypt... -lk5crypto
checking for library containing krb5_sendauth... no
configure: error: could not find function 'krb5_sendauth' required for
Kerberos 5

how to avoid this.? plz help me asap.

OS: HP-UX 11i

Advance thanks,
-Kanchana

---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly

--
Bruce Momjian                        |  http://candle.pha.pa.us
pgman@candle.pha.pa.us               |  (610) 359-1001
+  If your life is a hard drive,     |  13 Roberts Road
+  Christ can be your backup.        |  Newtown Square, Pennsylvania

19073

-- 
  Bruce Momjian                        |  http://candle.pha.pa.us
  pgman@candle.pha.pa.us               |  (610) 359-1001
  +  If your life is a hard drive,     |  13 Roberts Road
  +  Christ can be your backup.        |  Newtown Square, Pennsylvania 19073

"kanchana" <pkkanchana@gmx.net> writes:

i thinkproblem is in readline. (i have tried with hp-ux readline (from depot
too), same probelm.

Giles Lean tracked down this issue a week or three back. IIRC the
conclusion was that libreadline needed some source tweaks to work
properly as a shared library on HPUX --- it doesn't establish a proper
dependency on libcurses, or something like that. Check the PG list
archives for details.

regards, tom lane

kanchana wrote:

Hello Bruce Momjian,

Thanks a lot for all. I tried by adding -lcurses on link line of psql.
Looks like it works fine.

Next i moved to compile with krb5, it gives error.
as follows..........
#./configure --prefix=/opt/postgresql --enable-integer-datetimes --with-open
ssl=/usr/local/ssl --with-krb5=/usr/local/krb5

----------no problem here.

#gmake gives ERROR
:
:
/usr/ccs/bin/ld -b +b /opt/postgresql/lib fe-auth.o fe-connect.o fe-exec.o
fe-misc.o fe-print.o fe-lobj.o pqexpbuffer.o dllist.o md5.o pqsignal.o
fe-secure.o wchar.o
encnames.o -L/usr/local/krb5/lib -L/usr/local/ssl/lib -lssl -lcrypto -lkrb5
-lk5crypto -lcom_err -lnsl -o libpq.sl
/usr/ccs/bin/ld: (Warning) At least one PA 2.0 object file (fe-auth.o) was
detected. The linked output may not run on a PA 1.x system.
/usr/ccs/bin/ld: DP relative code in file
/usr/local/krb5/lib/libkrb5.a(init_ctx.o) - shared library must be position
independent. Use +z or +Z to recompile.

Right here, it looks like the k5crypto library wasn't created properly.
I think the problem is that it is trying to create a shared libpq, but
kerberos is a non-shared *.a library, or has non-shared object files in
it. Just a guess, of course.

-- 
  Bruce Momjian                        |  http://candle.pha.pa.us
  pgman@candle.pha.pa.us               |  (610) 359-1001
  +  If your life is a hard drive,     |  13 Roberts Road
  +  Christ can be your backup.        |  Newtown Square, Pennsylvania 19073

Hello Bruce Momjian,

Thanks for your times and replies. Once i recompiled krb5 with -fPIC option,
it (postgresql) compiles fine.
Again thanks.

Regards,
-Kanchana

kanchana wrote:

Hello Bruce Momjian,

Thanks a lot for all. I tried by adding -lcurses on link line of

psql.

Looks like it works fine.

Next i moved to compile with krb5, it gives error.
as follows..........

#./configure --prefix=/opt/postgresql --enable-integer-datetimes --with-open

ssl=/usr/local/ssl --with-krb5=/usr/local/krb5

----------no problem here.

#gmake gives ERROR
:
:
/usr/ccs/bin/ld -b +b /opt/postgresql/lib fe-auth.o fe-connect.o

fe-exec.o

fe-misc.o fe-print.o fe-lobj.o pqexpbuffer.o dllist.o md5.o pqsignal.o
fe-secure.o wchar.o

encnames.o -L/usr/local/krb5/lib -L/usr/local/ssl/lib -lssl -lcrypto -lkrb5

-lk5crypto -lcom_err -lnsl -o libpq.sl
/usr/ccs/bin/ld: (Warning) At least one PA 2.0 object file (fe-auth.o)

was

detected. The linked output may not run on a PA 1.x system.
/usr/ccs/bin/ld: DP relative code in file
/usr/local/krb5/lib/libkrb5.a(init_ctx.o) - shared library must be

position

independent. Use +z or +Z to recompile.

Right here, it looks like the k5crypto library wasn't created properly.
I think the problem is that it is trying to create a shared libpq, but
kerberos is a non-shared *.a library, or has non-shared object files in
it. Just a guess, of course.

--
Bruce Momjian                        |  http://candle.pha.pa.us
pgman@candle.pha.pa.us               |  (610) 359-1001
+  If your life is a hard drive,     |  13 Roberts Road
+  Christ can be your backup.        |  Newtown Square, Pennsylvania

19073

Hello Bruce Momjian,

I done sucessfully for hp-ux pa-risc. Then i treid to work on IA64.
Configure ok but "gmake" gives following error..

Plz tel me how to overcome this.

Advance thanks for your time and efforts.
:
gcc -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -I../../../../src/
include -I/home/saratha/krb5/include -I/usr/local/ssl/include -c -o float.o
float.c
float.c: In function `float4out':
float.c:233: Internal compiler error in emit_move_insn, at expr.c:2739
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://www.gnu.org/software/gcc/bugs.html&gt; for instructions.
gmake[4]: *** [float.o] Error 1
gmake[4]: Leaving directory `src/backend/utils/adt'
gmake[3]: *** [adt-recursive] Error 2
gmake[3]: Leaving directory `src/backend/utils'
gmake[2]: *** [utils-recursive] Error 2
gmake[2]: Leaving directory `src/backend'
gmake[1]: *** [all] Error 2
gmake[1]: Leaving directory `src'
gmake: *** [all] Error 2

Regards,
-Kanchana

kanchana wrote:

Hello Bruce Momjian,

Thanks a lot for all. I tried by adding -lcurses on link line of

psql.

Looks like it works fine.

Next i moved to compile with krb5, it gives error.
as follows..........

#./configure --prefix=/opt/postgresql --enable-integer-datetimes --with-open

ssl=/usr/local/ssl --with-krb5=/usr/local/krb5

----------no problem here.

#gmake gives ERROR
:
:
/usr/ccs/bin/ld -b +b /opt/postgresql/lib fe-auth.o fe-connect.o

fe-exec.o

fe-misc.o fe-print.o fe-lobj.o pqexpbuffer.o dllist.o md5.o pqsignal.o
fe-secure.o wchar.o

encnames.o -L/usr/local/krb5/lib -L/usr/local/ssl/lib -lssl -lcrypto -lkrb5

-lk5crypto -lcom_err -lnsl -o libpq.sl
/usr/ccs/bin/ld: (Warning) At least one PA 2.0 object file (fe-auth.o)

was

detected. The linked output may not run on a PA 1.x system.
/usr/ccs/bin/ld: DP relative code in file
/usr/local/krb5/lib/libkrb5.a(init_ctx.o) - shared library must be

position

"kanchana" <pkkanchana@gmx.net> writes:

gcc -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -I../../../../src/
include -I/home/saratha/krb5/include -I/usr/local/ssl/include -c -o float.o
float.c
float.c: In function `float4out':
float.c:233: Internal compiler error in emit_move_insn, at expr.c:2739
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://www.gnu.org/software/gcc/bugs.html&gt; for instructions.

Please observe that gcc's failure message tells you to report it to the
gcc project. This is not Postgres' problem.

regards, tom lane

Hello Tom,

Thanks for your reply, as i'm not positon to upgrade gcc, i tried to build
using CC=cc
it compile fine.

while testing, as follows error came(initdb failed)

#adduser postgres
#mkdir /opt/postgresql/data
#chown postgres /opt/postgresql/data
#su - postgres
$/opt/postgresql/bin/initdb -D /opt/postgresql/data

The files belonging to this database system will be owned by user
"postgres".
This user must also own the server process.

The database cluster will be initialized with locale C.

Fixing permissions on existing directory /opt/postgresql/data... ok
creating directory /opt/postgresql/data/base... ok
creating directory /opt/postgresql/data/global... ok
creating directory /opt/postgresql/data/pg_xlog... ok
creating directory /opt/postgresql/data/pg_clog... ok
creating template1 database in /opt/postgresql/data/base/1...
initdb failed.
$

How to overcome? I don't know what may cause this problem.

Plz help me asap.

Advance thanks.

Regards,
-Kanchana

"kanchana" <pkkanchana@gmx.net> writes:

gcc -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -I../../../../src/

include -I/home/saratha/krb5/include -I/usr/local/ssl/include -c -o

float.o

"kanchana" <pkkanchana@gmx.net> writes:

creating template1 database in /opt/postgresql/data/base/1...
initdb failed.

Try it as
initdb -d [other options as before] 2>initdb.err
initdb.err will probably be voluminous, but show us the last
couple dozen lines.

regards, tom lane

Hello Tom,

It(inidb.err) shows error as follows...........
____________________________________________________________________________
_________________
DEBUG: Typ == NULL, typeindex = 11
DEBUG: -> 1184
DEBUG: inserted
DEBUG: inserting column 11 value '1082 1083select timestamptz($1 + $2)'
DEBUG: Typ == NULL, typeindex = 15
ERROR: oidvectorin: error in "select timestamptz($1 + $2)": can't parse
"select
timestamptz($1 + $2)"
DEBUG: proc_exit(1)
DEBUG: shmem_exit(1)
DEBUG: exit(1)

initdb failed.
____________________________________________________________________________
___________________
How to overcome this.
Advance thanks.

Regards,
-Kanchana

"kanchana" <pkkanchana@gmx.net> writes:

It(inidb.err) shows error as follows...........

DEBUG: inserting column 11 value '1082 1083select timestamptz($1 + $2)'
DEBUG: Typ == NULL, typeindex = 15
ERROR: oidvectorin: error in "select timestamptz($1 + $2)": can't parse
"select timestamptz($1 + $2)"

Hm. There seems to be something wrong with your postgres.bki file. It
looks like initdb is working on what should be this line:

insert OID = 1176 ( timestamptz 11 1 14 f f t f s 2 1184 "1082 1083" "select timestamptz($1 + $2)" - _null_ )

but for some reason the two separate columns "1082 1083" and "select timestamptz($1 + $2)"
have gotten run together. You should look at the .bki file to confirm
that there is something wrong with it and not with the initdb code; but
assuming that the file is misconstructed, I'd have to guess there is a
problem with the 'sed' or 'awk' installed on your machine, because those
programs are what are used to construct it.

Another possibility is that you have a corrupted download of Postgres,
with some error in the source file (include/pg_proc.h) that generates
this .bki entry.

regards, tom lane

Hello Tom,

Thanks a lot for your respone. I treid with new source, again same
probelm.
So i edited postgres.bki file as you sent(missind quotes..). Once i give
quotes as follows..it works fine.
i.e.
in .bki file,
for ex..

insert OID = 1176 ( timestamptz 11 1 14 f f t f s 2 1184 "1082 1083select
timestamptz($1 + $2)" - _null_ ) ----------TO --------------->
insert OID = 1176 ( timestamptz 11 1 14 f f t f s 2 1184 "1082 1083" "select
timestamptz($1 + $2)" - _null_ )

One simple Q!, now no problem, postgresql works fine.
* is there any problem with the 'sed' or 'awk' installed on my
machine(made me to edit .bki file)
* i builded wih --with-krb5, how to test krb5 authentication to find whether
it works fine or not. plz point me any link or steps.

Thanks and Regards,
-Kanchana

"kanchana" <pkkanchana@gmx.net> writes:

It(inidb.err) shows error as follows...........

DEBUG: inserting column 11 value '1082 1083select timestamptz($1 + $2)'
DEBUG: Typ == NULL, typeindex = 15
ERROR: oidvectorin: error in "select timestamptz($1 + $2)": can't parse
"select timestamptz($1 + $2)"

Hm. There seems to be something wrong with your postgres.bki file. It
looks like initdb is working on what should be this line:

insert OID = 1176 ( timestamptz 11 1 14 f f t f s 2 1184 "1082 1083"

"select timestamptz($1 + $2)" - _null_ )

but for some reason the two separate columns "1082 1083" and "select

timestamptz($1 + $2)"

"kanchana" <pkkanchana@gmx.net> writes:

So i edited postgres.bki file as you sent(missind quotes..). Once i give
quotes as follows..it works fine.

okay ...

* is there any problem with the 'sed' or 'awk' installed on my
machine(made me to edit .bki file)

Evidently. Or maybe we're doing something non-portable, though I'd have
thought any such problem would have been noticed before now. If you
want to dig into it, you can look at src/backend/catalog/genbki.sh,
which is the shell script that builds postgres.bki from the input files
in src/include/catalog --- in particular, pg_proc.h is the one that
gives rise to the line that's gettting munged. Perhaps you could trace
through genbki.sh and figure out just what's going wrong? Then you
could either send in a bug report against your sed or awk, or let us
know how we blew it.

* i builded wih --with-krb5, how to test krb5 authentication to find whether
it works fine or not. plz point me any link or steps.

Sorry, I know nothing at all about Kerberos. Anyone out there?

regards, tom lane

Tom Lane <tgl@sss.pgh.pa.us> writes:

"kanchana" <pkkanchana@gmx.net> writes:

gcc -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -I../../../../src/
include -I/home/saratha/krb5/include -I/usr/local/ssl/include -c -o float.o
float.c
float.c: In function `float4out':
float.c:233: Internal compiler error in emit_move_insn, at expr.c:2739
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://www.gnu.org/software/gcc/bugs.html&gt; for instructions.

Please observe that gcc's failure message tells you to report it to the
gcc project. This is not Postgres' problem.

If you see the same bug repeatably it's a gcc bug. but if you see a different
message each time you try to compile it's more likely you have bad memory in
the machine. It's worth running a memory checker like memtest86 anyways, it
can't hurt. Bad memory is really quite common.

--
greg